Owner's Manual
Table Of Contents
- Users Manual
- Using This Manual
- Table of Contents
- Q & A Index
- Compatible Cameras
- Supplied Accessories
- Parts & Controls
- Check Before Use
- Operation
- Inserting the Batteries
- Replacing / Recharging Batteries
- Attaching to a Camera
- Detaching from a Camera
- Adjusting the Flash Head
- Power On
- Selecting Flash Mode
- Settings and the LCD
- Custom Functions and Settings
- Flash Modes
- Manual Flash Mode
- Distance-Priority Manual Flash Mode
- Wireless Multiple Flash-Unit Photography
- Functions
- For Use with Non-CLS-Compatible SLR Cameras
- For Use with COOLPIX Cameras
- Troubleshooting
- Warning Indicators
- Updating Firmware
- Specs
- Index
- A Collection of Example Photos
- Warranty
Operation
B
B–14
Turn the SB-700 and the
camera body on.
STEP
4
Turning the SB-700 and camera on
LCD sample
The image below is the SB-700 LCD sample under the following •
conditions: flash mode: i-TTL mode; image area: DX format;
illumination pattern: standard; ISO sensitivity: 100; zoom head
position: 35 mm; f-number of aperture: 5.6
Icons on the LCD may differ depending on the SB-700 settings and •
the camera and lens in use.
Flash mode
Effective ash output
distance range
Zoom head position
DX format
SB-700 status
icons
Connected to a
CLS-compatible
camera
SB-700 ash information