Owner's Manual
Table Of Contents
- Users Manual
- Using This Manual
- Table of Contents
- Q & A Index
- Compatible Cameras
- Supplied Accessories
- Parts & Controls
- Check Before Use
- Operation
- Inserting the Batteries
- Replacing / Recharging Batteries
- Attaching to a Camera
- Detaching from a Camera
- Adjusting the Flash Head
- Power On
- Selecting Flash Mode
- Settings and the LCD
- Custom Functions and Settings
- Flash Modes
- Manual Flash Mode
- Distance-Priority Manual Flash Mode
- Wireless Multiple Flash-Unit Photography
- Functions
- For Use with Non-CLS-Compatible SLR Cameras
- For Use with COOLPIX Cameras
- Troubleshooting
- Warning Indicators
- Updating Firmware
- Specs
- Index
- A Collection of Example Photos
- Warranty
D–27
Wireless Multiple Flash-unit Photography
D
Checking Status in Wireless Multiple Flash-unit Photography
The ash-ready indicator on the SB-700 and the sound monitor can
be used to check that wireless multiple ash-unit photography is
operating during and after taking a picture.
When the SB-700 is used as a wireless remote flash unit, the sound •
monitor can be used to check operational status. This function can
be activated or canceled using custom setting (0B-20). It is set to
activate as the default.
Checking flash operation using the flash-ready indicator
or sound monitor
Master
ash unit
Remote ash unit
Speedlight status
Flash-ready
indicator
Flash-ready
indicator
Sound
monitor
Lights up
The back
indicator
lights
up and
the front
indicator
blinks.
One beep Ready to re
Goes out
and lights
up when
ready to re
The back
indicator
lights
up and
the front
indicator
blinks or
goes out.
Two short
beeps
Fired properly