Owner's Manual

E–18
E
Functions
Flash Photography Support Functions
Power zoom function
The SB-910 automatically adjusts the zoom head position to match the lens focal
length.
• Zoom head positions automatically adjusted differ depending on the settings. For
more details, refer to “Specifications.” (0H-17)
Power zoom function activated
Power zoom function activated
Zoom head position manually
set
Power zoom function canceled
(zoom head position must be
manually set)
Nikon Diffusion Dome attached
Built-in wide panel in use
Zoom head position at the
maximum wide-angle position
Zoom head position at the
maximum telephoto position
Setting the zoom head position manually ■
In order to change the zoom head position to one that does not match the focal
length, the zoom head position must be adjusted manually.
An “•
” above the “ ” indicator appears on the LCD panel when the
zoom head position is set manually.
Press function button 1 to highlight the zoom head position and then rotate the •
selector dial to set the zoom head position.
Rotate the selector dial clockwise to increase the value, and counterclockwise to •
decrease the value.
The zoom head position can also be adjusted with function button 1. In this case, •
the value increases each time function button 1 is pressed. Note that the value
returns to the widest angle value after the highest telephoto value has been
reached.
In order to reactivate the power zoom function, press function button 1 to display •
“
” and then press function button 2.