Owner's Manual

H–5
H
Tips on Speedlight Care and Reference Information
Never use thinner, benzene or other active agents when
cleaning the Speedlight, as this may damage the Speedlight
or cause it to catch  re. Using these agents may also impair your
health.
"
WARNING
Cleaning
Dirt on the flash panel can cause it to break when the flash is fired. Clean the •
flash panel regularly.
Use a blower brush to remove dirt and dust from the SB-910 and clean it with a •
soft, clean cloth. After using the SB-910 near saltwater, wipe the flash unit with a
soft, clean cloth moistened slightly with plain water to remove the salt, then dry it
using a dry cloth.
On rare occasions, the LCD may turn on or go dark, due to static electricity. This •
is not a malfunction. The display will soon return to normal.
Do not drop the SB-910 or hit it against a hard surface, as this may damage its •
precision mechanisms. Do not apply strong pressure to the LCD panel.
Storage
Store the SB-910 in a cool, dry place to prevent malfunctions due to high •
humidity, as well as the growth of mold or mildew.
Keep the SB-910 away from chemicals such as camphor or naphthalene. Avoid •
exposing the SB-910 to magnetic waves from TVs and radios.
Do not use or leave the SB-910 in locations subject to high temperatures such as •
those encountered near a heater or stove, as this may cause damage.
When not using the SB-910 for more than two weeks, be sure to remove the •
batteries to prevent malfunctions due to battery leakage.
Take the SB-910 out once a month, insert the batteries and fire the unit several •
times to refresh the capacitor.
Tips on Speedlight Care