Owner's Manual
Table Of Contents
- Users Manual
- Using This Manual
- Compatible Cameras
- Tips on Identifying CPU NIKKOR Lenses
- Terminology
- Q & A Index
- Check Before Use
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Basic Operation
- Flash Modes
- Wireless Multiple Flash-Unit Photography
- Functions
- For Use with Non-CLS-Compatible SLR Cameras
- For Use with COOLPIX Cameras
- Troubleshooting
- Warning Indicators
- Guide Number, Aperture and Flash-to-Subject Distance
- Cleaning / Care
- Notes on Batteries
- Updating Firmware
- Optional Accessories
- Specs
- Index
- A Collection of Example Photos
- Warranty
C–4
C
Flash Modes
v When insuf cient ash output for correct exposure is indicated
When the flash-ready indicators on the •
SB-910 and in the camera’s viewfinder blink
for approx. 3 seconds after a picture is taken,
underexposure due to insufficient flash
output may have occurred. To compensate,
use a wider aperture or higher ISO sensitivity,
or move the flash unit closer to the subject
and reshoot.
• Amount of underexposure due to insufficient
flash output is indicated by the exposure
value (Ü0.3 EV to Ü3.0 EV) on the SB-910’s
LCD panel for approx. 3 seconds.
Press function button 3 to redisplay exposure •
value.