Owner's Manual
Table Of Contents
- Users Manual
- Using This Manual
- Compatible Cameras
- Tips on Identifying CPU NIKKOR Lenses
- Terminology
- Q & A Index
- Check Before Use
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Basic Operation
- Flash Modes
- Wireless Multiple Flash-Unit Photography
- Functions
- For Use with Non-CLS-Compatible SLR Cameras
- For Use with COOLPIX Cameras
- Troubleshooting
- Warning Indicators
- Guide Number, Aperture and Flash-to-Subject Distance
- Cleaning / Care
- Notes on Batteries
- Updating Firmware
- Optional Accessories
- Specs
- Index
- A Collection of Example Photos
- Warranty
C–7
C
Flash Modes
Auto Aperture Flash Mode
Taking a picture in auto aperture flash mode
Make sure the actual ash-to-
subject distance is within the
effective ash output distance
range.
Con rm the ash-ready
indicator is on, and then shoot.
v When insuf cient ash output for correct exposure is indicated
When the ash-ready indicators on the SB-910
and in the camera’s view nder blink for approx.
3 seconds after a picture is taken, underexposure
due to insuf cient ash output may have occurred.
To compensate, use a wider aperture or higher
ISO sensitivity, or move the ash unit closer to the
subject and reshoot.
t Checking exposure before taking a picture
Test re the Speedlight under the same conditions
and with the same Speedlight and camera settings
before taking the actual picture.
When the flash-ready indicators blink after test •
firing, underexposure due to insufficient flash
output may have occurred.