Owner's Manual
Table Of Contents
- Users Manual
- Using This Manual
- Compatible Cameras
- Tips on Identifying CPU NIKKOR Lenses
- Terminology
- Q & A Index
- Check Before Use
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Basic Operation
- Flash Modes
- Wireless Multiple Flash-Unit Photography
- Functions
- For Use with Non-CLS-Compatible SLR Cameras
- For Use with COOLPIX Cameras
- Troubleshooting
- Warning Indicators
- Guide Number, Aperture and Flash-to-Subject Distance
- Cleaning / Care
- Notes on Batteries
- Updating Firmware
- Optional Accessories
- Specs
- Index
- A Collection of Example Photos
- Warranty
C–8
C
Flash Modes
Non-TTL Auto Flash Mode
The SB-910’s light sensor for non-TTL auto ash measures the ash that is re ected
on the subject, and the SB-910 controls the ash output level according to the
re ected ash data.
Setting non-TTL auto flash mode
Non-TTL auto ash mode can be set as a non-TTL auto ash mode option in the
custom settings. (0B-17)
The default setting of the non-TTL auto flash mode option is auto aperture flash •
(non-TTL auto flash with aperture priority) with monitor pre-flashes.
Press the [MODE] button.
Rotate the selector dial to
display
.
Press the [OK] button.
Non-TTL auto flash mode LCD example
Aperture; underlined when aperture is set on
the SB-910
: Monitor pre- ashes
: Non-TTL auto ash