Owner's Manual
Table Of Contents
- Users Manual
- Using This Manual
- Compatible Cameras
- Tips on Identifying CPU NIKKOR Lenses
- Terminology
- Q & A Index
- Check Before Use
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Basic Operation
- Flash Modes
- Wireless Multiple Flash-Unit Photography
- Functions
- For Use with Non-CLS-Compatible SLR Cameras
- For Use with COOLPIX Cameras
- Troubleshooting
- Warning Indicators
- Guide Number, Aperture and Flash-to-Subject Distance
- Cleaning / Care
- Notes on Batteries
- Updating Firmware
- Optional Accessories
- Specs
- Index
- A Collection of Example Photos
- Warranty
C–13
C
Flash Modes
Distance-priority Manual Flash Mode
Taking a picture in distance-priority manual flash
mode
Press function button 3 to
highlight ash-to-subject
distance.
Set the ash-to-subject distance
with the selector dial, and then
press the [OK] button.
The flash-to-subject distance can be set •
with function button 3 as well.
The flash-to-subject distance varies •
depending on ISO sensitivity within a
range of between 0.3 m and 20 m.
Con rm the ash-ready
indicator is on, and then shoot.
Flash-to-subject distance range in distance-priority manual flash
mode
Flash-to-subject distance range of between 0.3 m and 20 m•
If the desired flash-to-subject distance is not displayed, select a shorter flash-to-•
subject distance. E.g., if the flash-to-subject distance is 2.7 m, select 2.5 m.
v When insuf cient ash output for correct exposure is indicated
When the ash-ready indicators on the
SB-910 and in the camera’s view nder blink
for approx. 3 seconds after a picture is taken,
underexposure due to insuf cient ash output
may have occurred. To compensate, use a
wider aperture or higher ISO sensitivity and
reshoot.