Owner's Manual
Table Of Contents
- Users Manual
- Using This Manual
- Compatible Cameras
- Tips on Identifying CPU NIKKOR Lenses
- Terminology
- Q & A Index
- Check Before Use
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Basic Operation
- Flash Modes
- Wireless Multiple Flash-Unit Photography
- Functions
- For Use with Non-CLS-Compatible SLR Cameras
- For Use with COOLPIX Cameras
- Troubleshooting
- Warning Indicators
- Guide Number, Aperture and Flash-to-Subject Distance
- Cleaning / Care
- Notes on Batteries
- Updating Firmware
- Optional Accessories
- Specs
- Index
- A Collection of Example Photos
- Warranty
C–18
C
Flash Modes
Repeating Flash Mode
In repeating ash mode, the SB-910 res repeatedly during a single exposure,
creating stroboscopic multiple-exposure effects.
Be sure to use fresh or fully charged batteries and allow enough time for the flash •
unit to recycle between each repeating flash session.
Because of the lower shutter speeds, use of a tripod is recommended to prevent •
camera/flash unit shake.
Insufficient flash output for correct exposure is not indicated in repeating flash •
mode.
Setting repeating flash mode
Press the [MODE] button.
Rotate the selector dial to
display
.
Press the [OK] button.
Repeating flash mode LCD example
Flash output level
Frequency of ash rings
Effective ash output
distance (numerical
indicator)
Effective ash output distance (T)
Number of ash
rings