Owner's Manual
Table Of Contents
- Users Manual
- Using This Manual
- Compatible Cameras
- Tips on Identifying CPU NIKKOR Lenses
- Terminology
- Q & A Index
- Check Before Use
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Basic Operation
- Flash Modes
- Wireless Multiple Flash-Unit Photography
- Functions
- For Use with Non-CLS-Compatible SLR Cameras
- For Use with COOLPIX Cameras
- Troubleshooting
- Warning Indicators
- Guide Number, Aperture and Flash-to-Subject Distance
- Cleaning / Care
- Notes on Batteries
- Updating Firmware
- Optional Accessories
- Specs
- Index
- A Collection of Example Photos
- Warranty
C–20
C
Flash Modes
Taking a picture in repeating flash mode
Press function button 2 to
highlight the ash output level.
Rotate the selector dial to
choose the ash output level,
and then press the [OK] button.
Flash output level can be changed with •
function button 2.
Flash output level can be set between •
M1/8 and M1/128.
Press function button 3 to
highlight the number of ash
rings, rotate the selector dial
to choose the number, and then
press the [OK] button.
Press function button 3 to
highlight the frequency of ash
rings, rotate the selector dial
to choose the frequency, and
then press the [OK] button.
Determine the guide number
according to the ash output
level and the zoom head
position.
For more information, see •
“Specifications.” (0H-18)