Owner's Manual
Table Of Contents
- Users Manual
- Using This Manual
- Compatible Cameras
- Tips on Identifying CPU NIKKOR Lenses
- Terminology
- Q & A Index
- Check Before Use
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Basic Operation
- Flash Modes
- Wireless Multiple Flash-Unit Photography
- Functions
- For Use with Non-CLS-Compatible SLR Cameras
- For Use with COOLPIX Cameras
- Troubleshooting
- Warning Indicators
- Guide Number, Aperture and Flash-to-Subject Distance
- Cleaning / Care
- Notes on Batteries
- Updating Firmware
- Optional Accessories
- Specs
- Index
- A Collection of Example Photos
- Warranty
D–8
D
Wireless Multiple Flash-unit Photography
Taking a picture with Advanced Wireless Lighting
1. Master flash unit setting (flash mode, flash compensation
value and channel)
[Setting i-TTL mode and channel 1 (example)]
Press function button 2 to
highlight
.
Press the [MODE] button,
choose [TTL] with the selector
dial, and then press the [OK]
button.
Press function button 3, choose
a ash compensation value
with the selector dial, and then
press the [OK] button.
Press function button 2 to
highlight
for remote ash
unit group.
Other remote flash unit groups can be •
chosen with the selector dial.
Repeat procedures and to
set the ash mode and ash
compensation value of the
remote ash unit group A.
Repeat procedures and
to set the remote ash unit
groups B and C.
Press function button 3, choose
“CH 1” with the selector dial,
and then press the [OK] button.
Advanced Wireless Lighting