Product Manual
En
Fr
Es
Pt
12
Internal display
1. 『 』- Target aiming/Laser irradiate system
『
』- Aim at the target. Position the target at the center of the reticle.
『
』- Appears while the laser is being used for a measurement.
(Remains present during single measurement. Blinks during continuous measurements.)
Warning:Donotlookintotheobjectivelenseswhenthismarkisshown.
2. 『
』- Distance/measurement status display
Digitally indicates measured distance in meters or yards. Also indicates measuring
status such as “Measurement in progress”, “Measurement unsuccessful” or “Unable to
measure.”
<Examples of measurement results>
(Distance)
Display of results: ( < 999.9m/yards) e.g. 234.9 meters = 『
』
Display of results: ( ≧ 1,000m/yards) e.g. 1,065 yards = 『
』
『
』Now measuring
『
』Failure to measure or unable to measure distance
3. 『
』Display units
『 』Indicates distance being measured in meters.
『 』Indicates distance being measured in yards.
4. 『 』Indicates battery condition. (See "Changing Batteries")
5. 『
』Display modes
A. Horizontal Distance Mode
『
』Calculates horizontal distance to your target by measuring the linear distance and angle, and displays the
results.
B. Linear Distance Mode
『 (no sign) 』 Calculates linear distance to your target and displays the results.
6. 『
』Target Priority mode
First Target Priority mode
『
』Indicated when First Target Priority mode is set.
Distant Target Priority mode
『
』Indicated when Distant Target Priority mode is set.