Product Manual

21
En
Fr
Es
Pt
Troubleshooting/Repair
If your Nikon RifleHunter 1000/Archer's Choice MAX should require repair, please contact your local dealer for
details regarding where to send it. Before doing so, you are advised to consult the Troubleshooting Table below.
Symptom Check Points
Unit does not turn
on — LCD fails to
illuminate
Target range cannot
be obtained
[---](“Cannot
measure”) appears
Closer target cannot
be measured
Target beyond a
certain distance
cannot be measured
•DepressPOWERbutton.
•Checkandreplacebatteriesifnecessary.
•Besurethatnothing,suchasyourhandorfinger,is
blocking the laser emission aperture and laser detector.
•Besurethatthelaseremissionapertureandlaserdetector
are clean. Clean them if necessary.
•Besurethatthetargetshapeandconditionisappropriate
to reflect the laser beam.
•Replacebattery.
•Besuretoholdtheunitsteadywhiledepressingthe
POWERbutton.
•Besurethetargetiswithinmeasuringrange(10-915
meters/ 11-1,000 yards for RifleHunter 1000, 4.5-183
meters/ 5-200 yards for Archer's Choice MAX)
•Besurethatnothing,suchasleavesorgrass,isbetween
the Nikon
RifleHunter 1000/Archer's Choice MAX and the
target.
•Besurethatnothing,suchasleavesorgrass,isbetween
the Nikon
RifleHunter 1000/Archer's Choice MAX and the
target.