User's Manual

15
Getting Started
Camera Setup
5 Set the date and time, and
press flexible button 4 (O).
• Use JK to select a field and then use
HI to set the date and time.
• Select the minute field and press the
flexible button 4 (O) to confirm the
setting.
• Press flexible button 3 (m) to display m
on the screen and enable daylight saving time. To disable daylight saving time,
press flexible button 3 (m) again.
6 When the confirmation dialog is displayed, press flexible button
3 (R Yes).
7 Use JK to select the
background image to be
displayed when a menu or
setting screen is displayed, and
press flexible button 4 (O).
• The background selection screen may
not be displayed depending on your
country or region. In this case, proceed to step 8.
• To restore the default background image, press flexible button 3 (P).
8 Confirm the waterproofing-related
message and press K.
• There are seven message screens.
• Waterproofing-related messages are displayed in
the following situations.
- When turning on and setting the camera for the
first time
- When setting the camera to Shoot under
water (A31) or Underwater face framing (A32)
- When turning the camera on after charging
Date and time
DM Y
hm
01
/
01
/
2015
00
:
00
Menu background
Waterproong precautions