Owner's Manual

70 Reference: Connecting to a TV, Computer, or Printer / Printing Photographs
Connecting the Printer
Before printing, check that the camera battery is fully charged. If in doubt, charge the bat-
tery or use an EH-5 AC adapter (available separately).
1
Set the camera USB option to PTP ( 104).
2
Turn the printer on.
3
Turn the camera off .
4
Connect the supplied UC-E4 USB cable as shown. Do not use force or attempt to insert
the connectors at an angle. Connect the camera directly to the printer; do not connect
the cable via a USB hub or keyboard.
5
Turn the camera on. A welcome screen will be displayed, fol-
lowed by the PictBridge playback display. Proceed to “ Printing
Pictures One at a Time” (
71) or “ Printing Multiple Pictures” (
72).
➜
Press the multi selector left or right to view additional photographs, or press the but-
ton to zoom in on the current photo (
64). To view six photographs at a time, press
the
button. Use the multi selector to highlight photographs, or press to display
the highlighted photograph full frame.
USB connector