Manual

The "Custom Functions" dialog box offers menu plates for "Dial/Buttons", "Release",
"Film Operation", "AF", "Exposure/SB", "Shooting Data" and "Function Settings". For
details on each of these functions/modes, see "Help" menu.
(i.e. Self-Timer LED On When Shutter Release)
At the default setting, self-timer LED does not light up when the shutter is released.
You can change this so that it lights up during exposure.
Note:
• When you have set the custom option(s) on your camera, BB3HBH appears in camera's
rear LCD panel.
• To confirm, change or memorize the camera's custom settings on the computer, you
must turn the camera on.
• "Release Timing for Second Camera" enables you to set the custom function for
synchronized shutter release on two cameras — when used with Nikon Connecting Cord
MC-23. Set the same shutter speed/film advance mode for both cameras. When
selecting "Alternative", set the shutter speed faster than 1/250 sec. (Connecting F90X and
F5 cameras via the MC-23 will limit the F5 functions available.)
• "Time delay for auto meter-switch-off" in Photo Secretary's "Custom Functions"
dialog box is set at "8 sec." as the default setting, although the meter on some F5
models remains on approximately 16 sec. at the default setting. With these F5
models, selecting the "Time delay for auto meter-switch-off" default setting (8 sec.)
in Photo Secretary's "Custom Functions" dialog box causes 8MB to appear in
the camera's LCD panel.
• After changing the custom setting, turn the camera power off, then on again.
18