Manual

Custom Reset
The "Custom Reset" dialog box lets you change the initial setting of the camera's
Two-Button Reset function.
Exposure Mode, Flash Sync Mode, Focus Area and AF Area Mode settings can be
stored in the camera as Custom Reset data. This data can be retrieved by keeping
the camera's <HB and CUD buttons pressed for longer than two seconds.
1. Using the MC-34, connect the camera body and computer.
2. Turn on the camera power.
3. From Camera Operation, open the "Tool" menu and select the "Custom Reset".
The "Custom Reset" dialog box appears as in Figure 8. (Current setting appears in
the display.)
4. Select your desired Custom Reset settings, then click on "Set" or "Set & Reset" to
save the settings.
* Click on "Set" to send the new settings to the F5 camera and change the Two-
Button Reset setting on the camera.
* Click on "Set & Reset" to send new settings to the F5 camera, change old settings
and perform Two-Button Reset on the camera.
* For details on specific functions, see "Help" menu.
P Custom Reset
EKposure Mode Flash Sync Mode
fs] [fl] [M] [Norm] | [Rear]
Focus Rrea HI Rtea Mode
M
S M s
[+]
(«
"
I 1"" | Set ]
et a Reset ] |[ Cancel ]|
(Figure 8)
20