Manual

Notes for Basic Remote Operation
• With "Remote" function active, the computer communicates with the camera to
display current camera settings, and the shutter release button is held in the "lightly
pressed" position. (Camera remains in Online mode as long as remote function is
active.)
• The camera does not respond when you double-click on "Release" on the
computer.
About Shutter Speed:
• The shutter speed "Time" can only be selected when the "Bulb or Time selection" is
set at "Time". To expose at shutter speed "Time", click on "Release" to open the
"Time Release" dialog box (Figure 10), then click on "End" to close the shutter. (Bulb
or Time cannot be set when using the self-timer. Self-timer cannot be set when Bulb
or Time is already selected.)
Time Release
TIME Press End to stop release
I End ]
(Figure 10)
About Aperture
The aperture value in use depends on the attached lens. The lens aperture setting
takes priority over settings made on Photo Secretary software. The "Remote" dialog
box displays lens settings and status.
About Film Advance Mode
• To stop self-timer operation, change the film advance mode.
• Depending on your computer's processing speed, CH and CL film advance speeds
may slow and the intervals between shots may be uneven.
About AF Mode
With the focus mode selector set at M, neither AF-C or AF-S mode can be selected.
About Flash Sync Mode
With an SB-24, SB-25 or SB-26 attached to the camera, the Flash Sync Mode
selected on the Speedlight has priority over the Photo Secretary setting.
24