Manual

Editing Program

To edit program file, click on "Open" from the Program window, then open the

desired program file. (To edit or create program files only, you do not need to

connect the camera and computer.)

* Film speed and AF mode cannot be set in Program window. To change these

settings, first select the film speed and AF mode in "Remote" dialog box.

(See page 23.)

Select the programmed sequence you want to edit, then open the

"Tool"

menu and

select the "Edit Program" in the Program window or double-click on the desired

line.

The "Edit Program" dialog box appears (as in Figure 13).

Edit Program - 1

Time Delay Time Number of Shots

• •••• ••• Di

Month Day Hour Min. Sec. Hour Min. Sec.

Metering System Shutter Speed Rperture

g^g [=^ czza

Exposure Mode

O000

i«—IB

Flash Sync Mode , ,

<_,

, *B KZ\9 , „

Slouj Rear 1/ Q„ fl

Multiple Enposure

li—i I Cancel

rED

(Figure 13)

The following items will be displayed in the "Edit Program" dialog box:

• Camera ID • Aperture

• Time (Start time) • Exposure Mode

• Delay Time (interval between shooting • Exposure Compensation

operations) • Flash Sync mode

• Number of Shots • Flash Output Level Compensation

• Metering System • Multiple Exposure

• Shutter Speed