Manual

Setting Shooting Order Options
Shooting Order Options enables you to perform shootings using only your desired
programmed sequences, or repeat shooting operations of desired programmed
sequences.
Select your desired shooting order options in the "Control" dialog box.
1. Select your desired shooting programmed sequence. Open the "Tool" menu and
select the "Control" in the Program window to open the "Control" dialog box in
Figure 14.
Control - 1 m
Mark Clear
Times |J |
f Cancel
(Figure 14)
The following shooting order options can be set in the "Control" dialog box:
Mark: Clear Deletes the inputed "Control" code.
S Start shooting operation from the programmed sequence with "S".
R Repeat shooting operations to the programmed sequence with "R".
B Repeat shooting operations from the programmed sequence with
"B".
E Stop shooting operation with the programmed sequence with "E".
Times: Set the number of times the selected programmed sequences are to be
repeated.
2. After selecting the desired order, click on "OK".
31