Manual

Performing Program Shooting

Photo Secretary offers two program shooting modes:

Program shooting using "Run" function. (Activates all programmed sequences.)

Program shooting using "Step" function. (Activates only the selected

programmed sequence.)

Perform program shooting using "Run"

Open the

"Tool"

menu and select "Run" in the Program window. Start control, and

shoot according to order.

To shoot, depress the shutter release button, or select "AF Start/Release" in the

"Tool"

menu. (Shootings will be performed at the dates and times set in the program.)

After starting operation, an indication appears in the window during exposures.

Shooting follows the programmed date and time or the delay time. If the date and

time for shooting or delay time are not programmed, shooting occurs by selecting

"Release" in the

"Tool"

menu or pressing the shutter release button. ("Release"

command and shutter release button have priority over programmed shooting date

and time.)

Note:

• If the camera does not start shooting within 7.5 sec. after the release command is

sent from the computer, Photo Secretary cancels the programmed sequence and

starts shooting in accordance with the next programmed sequence.

• If the time for the next programmed sequence comes during the shooting operation,

Photo Secretary cancels the coming programmed sequence and continues the

current operation.