Manual
Checking the Camera's Location
The alert LED of the selected camera blinks, to check communicating status, or
camera's location.
1.
Connect camera body to computer using the MC-34 cable.
2.
Turn on the camera power.
3. In Camera Operation, open the
"Tool"
menu and select "Location Check". You will
see the dialog box shown in Figure 16.
The ID number of the selected camera will appear. Clicking on "Check" causes the
alert LED on the selected camera to blink for one second.
* For details about a specific
function,
see "Help" menu.
• Location Check
fllert LED on the Selected Camera blinks for
1
sec.
ID of the selected camera 255
[ Check ~~] Cancel
(Figure 16)
35