Manual
Custom Functions
The "Custom Functions" dialog box allows you
to set
camera function settings,
complementing
the
F5's Custom Setting features.
The F5 camera offers EEPROM memo storage
in two
areas
to
memorize custom
settings
—
one
in
Custom
Set
Memory A, one in Custom
Set
Memory
B.
Using the PC, you can select from
the
area (A
or
B)
to
which you will load camera
settings
or
store the new custom settings. Custom
Set
Memory
A is
selected
as
default setting.
The "Custom Functions" dialog
box
allows you
to:
Set custom functions.
Select the operating memory (select memory where data has been uploaded
or
data changes stored).
Select custom
set
memory (select memory
for
storing setting changes made
with camera's Custom Setting feature #0).
Setting Custom Functions
1.
Using the MC-33, connect the camera body and
PC.
2.
Turn on the camera power. (When setting custom functions only, you
do not
need
to turn on the camera power.)
3. From Camera Operation click on "Tool"-"Custom Functions"
to
access
the
"Custom Functions" dialog
box
shown
in
Figure
7.
4.
Select the Custom
Set
Memory you wish
to
confirm
or
modify.
Check
"A" or
"B"
at
the left
of
"Selecting Custom Setting"
to
indicate the memory
from which you wish
to
load data. (At the default setting, Photo Secretary will select
the Custom
Set
Memory designated
in
camera's Custom Setting feature #0.)
* This operation does
not
allow you
to
change the Custom
Set
Memory
to
which
the
camera's RAM
is
connected.
5. Click on "Load"
to
load and confirm
the
settings
of
your selected Custom
Set
Memory.
6. Select the Custom
Set
Memory
to
which you will send
the
new custom settings.
Check "A"
or
"B"
at
the left
of
"Selecting Custom Setting"
to
select the memory
where you wish
to
store data.
7. After selecting your desired custom functions/modes, click on "Set"
to
set the
new
custom functions
for
the camera. (Default settings
are
indicated with asterisk).
To change the settings
in
camera's Custom Setting feature #0, check
"A" or
"B"
at
the right
of
"Selecting Custom Setting".
18