Manual

Editing Program
1. To edit program file, click on "Open" from the Program window, then open the
desired program file. (To edit or create program files only, you do not need to
connect the camera and PC.)
* Film speed and AF mode cannot be set in Program window. To change these
settings, first select the film speed and AF mode in "Remote" dialog box. (See page
23.)
2. Select the programmed sequence you want to edit, then click on "Tool"-"Edit
Program" in the Program window or double click on the desired line. The "Edit
Program" dialog box appears (as in Figure 13).
Edit Piogiam - 1
Camera ID
"3
Time
Uelay I ime
Number of Shots
Month Day Hour Mm
Metering System
(•)
Sec.
Exposure Mode
P S A
Hour Min. Sec,
Shutter Speed
I 3
ea |5 3
1
Aperture
~E
~3
Flash Sync Mode
Norm Slow Rear
*B |5 3
OK
Multiple Exposure
Cancel
(Figure 13)
The following items will be displayed in the "Edit Program" dialog box:
1
Camera ID
• Time (Start time)
• Delay Time (interval between shooting
operations)
• Number of Shots
• Metering System
• Shutter Speed
1
Aperture
1
Exposure Mode
• Exposure Compensation
> Flash Sync mode
1
Flash Output Level Compensation
1
Multiple Exposure