Manual

3. Select the desired settings, then click on "OK". Updated programmed sequence

appears in the Program window.

To save a new program as a

file,

click on "Save" or "Save As" in the Program

window.

• For details on specific functions, see "Help" menu.

Note:

• The number of shooting orders will be set automatically. You cannot change this

number.

• "Time" can be set only for the starting programmed sequence (the first programmed

sequence or the programmed sequence marked "S"). The date and time set on the

PC will be used. To start program shooting immediately after clicking on

"Tool"

"Run",

input a just-elapsed time,

(i.e.,

two minutes earlier than current time.)

• Delay time commences from the start of the previous programmed sequence

(previous shot). Delay time cannot be set for the starting programmed sequence

(first shot).

• When you set the number of shots to

for multiple exposure shooting in one

programmed sequence, the film will advance after the shooting of the next

programmed sequence is complete.

• Shutter speeds X, bulb and Time cannot be selected.

• With the SB-24, SB-25 or SB-26 attached to the camera, the flash sync mode

selected on the Speedlight takes priority over the setting on Photo Secretary.

• When a different Flash Output Level Compensation value is set on the Speedlight,

the Flash Output Level Compensation is adjusted to accommodate the total

Speedlight and Photo Secretary setting values.