Manual

Checking the Camera's Location
Lets blink the alert LED of the selected camera, to check communicating status, or
camera's location.
1. Connect camera body to PC using the MC-33 cable.
2. Turn on the camera power.
3. In Camera Operation, click on "Tool"-"Location Check". You will see the dialog box
shown in Figure 19.
The ID number of the selected camera will appear. Clicking on "Check" causes the
alert LED on the selected camera to blink for one second.
For details about a specific function, see "Help" menu.
Location Check
Atert LED on the Selected Camera Lights up for tsec.
ID of the selected camera 255
Check Cancel
(Figure 19)
39