No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION.
Table of Contents Getting the Most from Your Camera .........................................3 Product Documentation ..............................................................6 For Your Safety...............................................................................7 Shock-, Water-, and Dust-Proofing ..........................................10 Shock-Proofing .....................................................................................10 Water- and Dust-Proofing.............................
Taking Photos in P, S, A, and M Modes........................................... 52 Backlighting........................................................................................... 57 Easy Panorama...................................................................................... 58 Underwater Photography 61 Important: Precautions............................................................... 61 Before Using the Camera Underwater .................................... 62 The Final Check ..........
Menu Options 98 Playback Menu Options ............................................................ 98 Shooting Menu Options............................................................ 99 Movie Menu Options .............................................................. 100 Image Processing Menu Options.......................................... 100 Setup Menu Options............................................................... 100 Connecting to a Computer 102 Installing the Supplied Software............
Getting the Most from Your Camera Take photos with the shutter-release button. Photos can be taken in any mode by pressing the shutterrelease button. See page 27 for more information. Shutter-release button Shoot movies with the movie-record button. Movies can be recorded by pressing the movie-record button in auto (0 40), creative (0 49), and advanced movie (0 77) modes.
Shoot underwater. Attach a special-purpose waterproof lens to take pictures at depths of up to 15 m (49 ft) for as long as 60 minutes at a time. See page 61 for more information. The camera offers the following features that may come in handy during underwater photography: • Compensate for the blue cast in pictures taken under water (0 65). • Distortion control for underwater photographs and movies (0 67). • A built-in flash that can be used for additional lighting under water (0 67).
Thank you for your purchase of a Nikon digital camera. For a complete guide to using your digital camera, see the Reference Manual (0 6). To get the most from your camera, please be sure to read this User’s Manual thoroughly and keep it where it will be read by all who use the product. Camera Settings The explanations in this manual assume that default settings are used.
Product Documentation The following documentation is supplied with the camera. DIGITAL CAMERA User’s Manual (this manual)—Describes how to take and view pictures. User's Manual En Reference Manual (on CD)—A complete guide to using your digital camera, included as a pdf file on the supplied Reference Manual CD-ROM. The Reference Manual can be viewed using Adobe Reader or Adobe Acrobat Reader 5.0 or later, available for free download from the Adobe website.
For Your Safety To prevent damage to your Nikon product or injury to yourself or to others, read the following safety precautions in their entirety before using this equipment. Keep these safety instructions where all those who use the product will read them. The consequences that could result from failure to observe the precautions listed in this section are indicated by the following symbol: icon marks warnings. To prevent possible injury, read all warnA This ings before using this Nikon product.
A Keep out of reach of children. Failure to A Do not leave the product where it will be observe this precaution could result in injury. In addition, note that small parts constitute a choking hazard. Should a child swallow any part of this equipment, consult a physician immediately. A Before using the camera underwater, remove straps intended exclusively for use on land. The strap could become wrapped around your throat, causing suffocation or drowning.
A Observe proper precautions when handling A Observe proper precautions when handling batteries. Batteries may leak or explode if improperly handled. Observe the following precautions when handling batteries for use in this product: • Use only batteries approved for use in this equipment. • Do not short or disassemble the battery. • Be sure the product is off before replacing the battery. If you are using an AC adapter, be sure it is unplugged.
Shock-, Water-, and Dust-Proofing The product conforms to the following standards: Shock-Proofing The camera, with the special-purpose waterproof lens attached, has passed drop tests compliant 1 with MIL-STD-810F Method 516.5: Shock. 2 These inhouse tests do not constitute a blanket guarantee of invulnerability to damage or destruction.
Important: Waterproof Lenses The product is not guaranteed shock-, water-, or dust-proof if the special-purpose waterproof lens is not attached. Before using this product, be sure to read the following sections, together with the instructions in “For Your Safety” (0 7–9) and in “Caring for the Camera and Battery: Cautions” (0 115–118). Before using the product underwater, read the cautions in “Underwater Photography” (0 61–76).
• Internal parts will be damaged by water and dust. To prevent water entry, do not remove the lens, open the connector or battery-chamber/memory card slot cover, or operate the lens release button or the latches or security locks on the connector and battery-chamber/memory card slot covers with wet hands, when the camera is wet, or in locations exposed to spray, wind, sand or dust. Ensure that memory cards and batteries are dry before insertion.
• The product is not guaranteed waterproof if struck, dropped, or otherwise subjected to strong pressure or violent physical shocks or vibration. If the product does suffer a fall or other physical shock, take it to Nikon-authorized service personnel and have it tested to make sure that it is still waterproof. Note that a fee will be charged for this service. • Damage due to user error is not covered under warranty.
Important: Location Data (GPS/GLONASS) Observe the following precautions when using the location data and track log features: • Track logs: While Yes is selected for Location data > Record location data in the setup menu, location data will be recorded with all pictures taken and the camera will continue to monitor location data even while off.
Notices • No part of the manuals included • Nikon will not be held liable for any with this product may be repro- damages resulting from the use of duced, transmitted, transcribed, this product. stored in a retrieval system, or trans- • While every effort has been made to lated into any language in any form, ensure that the information in these by any means, without Nikon’s prior manuals is accurate and complete, written permission.
Notice for Customers in the U.S.A. The Battery Charger IMPORTANT SAFETY INSTRUCTIONS—SAVE THESE INSTRUCTIONS DANGER—TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet if needed. This power unit is intended to be correctly oriented in a vertical or floor mount position.
Notice Concerning Prohibition of Copying or Reproduction Note that simply being in possession of material that has been digitally copied or reproduced by means of a scanner, digital camera, or other device may be punishable by law.
Disposing of Data Storage Devices Please note that deleting images or formatting memory cards or other data storage devices does not completely erase the original image data. Deleted files can sometimes be recovered from discarded storage devices using commercially available software, potentially resulting in the malicious use of personal image data. Ensuring the privacy of such data is the user’s responsibility.
D Use Only Nikon Brand Accessories Only Nikon brand accessories certified by Nikon specifically for use with your Nikon digital camera are engineered and proven to operate within its operational and safety requirements. THE USE OF NON-NIKON ACCESSORIES COULD DAMAGE YOUR CAMERA AND MAY VOID YOUR NIKON WARRANTY. D Servicing the Camera and Accessories The camera is a precision device and requires regular servicing.
sIntroduction Package Contents s Confirm that the package contains the following items: BF-N2000 body cap PA-N1000 O-ring protector Nikon 1 AW1 digital camera (comes with WP-O2000 O-ring attached; check O-ring for damage before use) EN-EL20 rechargeable Li-ion battery (with terminal cover) Lens (supplied only if lens kit is purchased with camera; comes with front and rear lens caps) AN-N1000 strap (intended exclusively for use on land) Silicon grease UC-E19 USB cable ViewNX 2/Short Movie Creator CD Wa
Parts of the Camera Take a few moments to familiarize yourself with camera controls and displays. You may find it helpful to bookmark this section and refer to it as you read through the rest of the manual. s The Camera Body 1 2 3 4 5 18 6 15 6 7 8 9 14 17 16 19 20 21 13 12 11 10 1 Movie-record button ............77, 79, 84 2 Shutter-release button............... 42, 80 3 Power switch........................................36 Power lamp ..........................................
The Camera Body (Continued) 13 14 15 3 s 4 5 16 1 2 17 6 19 18 20 21 22 7 12 11 10 9 8 1 Flash pop-up button..........................91 13 G (menu) button ........................ 26 2 Monitor .......................................... 24, 36 14 Memory card access lamp................ 43 3 W (playback zoom out/thumbnail) 15 K (playback) button......................... 44 button ..................................................44 16 J (OK) button ....................................
A The Multi Selector To navigate the menus, press the multi selector up, down, left, or right (1,3, 4, or 2) as shown below. Move cursor up Select highlighted item Return to previous menu s Select highlighted item or display sub-menu Move cursor down A Holding the Camera When framing photographs, hold the camera as shown below. Hold the camera in your right hand. Keep your elbows propped lightly against your torso. Cradle the lens with your left hand.
The Monitor 1 2 3 4 5 6 7 8 9 10 11 34 33 32 s NO ICON H Battery fully charged or partially discharged. Low battery. 12 13 14 15 16 17 18 19 31 30 29 28 27 26 25 24 23 1 Shooting mode ...................................27 2 Live image control..............................47 Creative mode ....................................49 Best moment capture selection Advanced movie selection ........ 77, 83 Exposure mode ...................................99 3 Flexible program indicator ...............
35 36 37 38 43 s 39 42 41 40 35 HDR ........................................................57 36 Auto distortion control......................99 37 Self-timer ..............................................89 38 Heading 2 39 Virtual horizon 2 40 Track log indicator 1, 2 41 Satellite signal indicator 1, 2 42 Altimeter/depth gauge 2 .........68, 101 43 Altitude/depth 2 .........................68, 101 1 Shown in detailed display. 2 Shown in altimeter, depth gauge, heading, and virtual horizon display.
The G Button s The shooting mode and most shooting, playback, and setup options can be accessed from the camera menus. Press the G button to display the menu selection dialog shown below, then use the multi selector to highlight the icon for the desired menu and press J. Playback menu (0 98): Adjust playback settings. G button Shooting menu (0 99): Adjust settings for still photography. Shooting mode menu (0 27): Choose a shooting mode. Movie menu (0 100): Adjust movie-recording options.
❚❚ Choosing a Shooting Mode To display the shooting mode menu, press the G button, highlight Shooting mode, and press J. Use the multi selector to highlight a shooting mode and press J to select the highlighted option. s Motion Snapshot mode Best moment capture mode Auto mode (0 40) Creative mode (0 49) Advanced movie mode (0 77) Options for each mode can be displayed by highlighting the mode and pressing 2. Press 4 to return to the shooting mode menu.
s u Best moment capture mode: Select Slow view to choose the timing for a shot as the scene plays back in slow motion, or choose Smart Photo Selector to let the camera automatically pick the best shot based on motion and composition. • Slow view (t) • Smart Photo Selector (y) C Auto mode: Take photographs using live controls (0 47). • Active D-Lighting (Y) • Background softening (5) • Motion control (6) • Brightness control (E) w Creative mode: Choose a scene (0 49).
v Advanced movie mode: Choose between HD (0 77) and slowmotion movies (0 83). • Programmed auto (P) • Shutter-priority auto (S) • Aperture-priority auto (A) • Manual (M) • Slow motion (y) s A & (Feature) The options for each mode can also be displayed by pressing 1 (&) on the multi selector after selecting the shooting mode.
s ❚❚ Using the Menus Use the multi selector to navigate the playback, shooting, movie, image processing, and setup menus. Multi selector 1 Select an item. Press 1 or 3 to highlight menu items and press 2 to view options for the highlighted item. 2 Select an option. Press 1 or 3 to highlight the desired option and press J to select. A Using the Menus The items listed may vary with camera settings. Items displayed in gray are not currently available.
First Steps 1 Attach the strap. The AN-N1000 strap supplied with the camera is exclusively for use on land. Attach the strap securely to the two camera eyelets. s Remove the AN-N1000 before using the camera underwater. A hand strap (available separately from third-party suppliers) is recommended to prevent loss when the camera is used underwater. 2 Charge the battery. Insert the battery into the charger q and plug the charger in w. An exhausted battery fully charges in about two hours.
3 Insert the battery and a memory card. s Undo the battery-chamber/memory card slot cover security lock (q) and unlatch (w) and slowly open the cover (e). After checking that they are in the correct orientation, insert the battery and memory card as follows: using the battery to keep the orange battery latch pressed to one side, slide the battery in until it latches (r), and then slide in the memory card until it clicks into place (t).
4 Attach the special-purpose waterproof lens. The camera is used with special-purpose waterproof lenses that attach as shown below (for information on attaching non-waterproof 1 NIKKOR lenses, see page 110). The lens generally used in this manual for illustrative purposes is a 1 NIKKOR AW 11–27.5mm f/3.5–5.6.
Check the lens: Remove any dust or other foreign matter from the lens O-ring seal (0 73). s Mounting mark (camera) Align the mounting marks Place the lens over the O-ring and press it into position Mounting mark (lens) Rotate the lens as shown until it stops When placing the lens over the O-ring, be careful not to damage the camera or lens; do not use excessive force.
A Detaching the Waterproof Lenses Be sure the camera is off when removing or exchanging lenses. To remove the lens, press and hold the lens release button (q) while rotating the lens as shown (w) and then detach the lens from the camera. After removing the lens, replace the lens caps and camera body cap.
5 Turn the camera on. s Press the power switch to turn the camera on. The power lamp will briefly light green and the monitor will turn on. Be sure to remove the lens cap before shooting. A Turning the Camera Off To turn the camera off, press the power switch again. The monitor will turn off. 6 Choose a language. A language-selection dialog will be displayed the first time the camera is turned on. Use the multi selector and J button to choose a language.
7 Set the clock. Use the multi selector and J button (0 22) to set the time and date. Note that the camera uses a 24-hour clock. Press 4 or 2 to highlight time zone and press J. s Press 1 or 3 to highlight date format and press J. Press 1 or 3 to highlight daylight Press 4 or 2 to select year, month, saving time option and press J. or date and press 1 or 3 to change. Press 2 to proceed.
8 Read the instructions on keeping your camera watertight. s Once the clock is set, the camera will display a series of messages on maintaining a watertight seal, which you are encouraged to read before using the camera for the first time. Press 4 or 2 to scroll through the messages. To exit, press J when the last message is displayed. A Note If you remove and reinsert the battery, the first of these messages may be displayed again for a few seconds.
9 Check the battery level and memory card capacity. Check the battery level and number Battery level of exposures remaining in the monitor (0 24).
zTaking and Viewing Photographs z The camera gives you a choice of auto mode for “point-andshoot” photography that leaves the camera in charge of choosing settings, creative mode, which lets you adjust settings according to your subject or creative intent, and a variety of other modes for hard-to-time shots or to capture the emotion surrounding special moments.
3 Ready the camera. Hold the camera securely with both hands, being careful not to obstruct the lens, AF-assist illuminator, or microphone. Rotate the camera as shown at lower right when taking pictures in “tall” (portrait) orientation. z 4 Frame the photograph. Position your subject in the center of the frame.
5 Focus. z Press the shutter-release button halfway to focus. If the subject is poorly lit, the AF-assist illuminator (0 21) may light to assist the focus operation. If the camera is able to focus, the selected Focus area focus area will be highlighted in green and a beep will sound (a beep may not sound if the subject is moving). If the camera is unable to focus, the focus area will be displayed in red.
6 Shoot. Smoothly press the shutterrelease button the rest of the way down to release the shutter and record the photograph. The memory card access lamp will light and the photograph will be displayed in the monitor for a few seconds (the photo will automatically clear from the display when the shutter-release button is pressed halfway). Do not eject the memory card or remove the battery until the lamp has gone out and recording is complete.
Viewing Photographs Press K to display your most recent photograph full frame in the monitor (fullframe playback). z K button Press 4 or 2 to view additional pictures. To zoom in on the current picture, press W button X. To view multiple pictures, press W when a picture is displayed full frame. X button To end playback and return to shooting mode, press the shutterrelease button halfway.
Deleting Pictures To delete the current picture, press O. Note that once deleted, pictures can not be recovered. 1 Display the photograph. Display the photograph you wish to delete as described on the preceding page. z 2 Press O. A confirmation dialog will be displayed. O button 3 Delete the photograph. Press O again to delete the picture and return to playback, or press K to exit without deleting the picture.
A Face Priority z The camera detects and focuses on portrait subjects (face priority). A double yellow border will be displayed if a portrait subject is detected facing the camera (if multiple faces, up to a maximum of five, are detected, the camera will select the closest subject). Press the shutter-release button halfway to focus on the subject in the double yellow border.
Live Image Control Live image controls let you adjust settings without leaving the shooting display, allowing you to preview how the changes will affect your photographs. To view the live image controls available in auto mode, press 1 (&). Highlight a control and press J to select, then press 1 or 3 to adjust the control and press J to return to shooting mode. To cancel the control, press 1 (&) again. z Active D-Lighting: Preserve details in highlights and shadows for natural contrast.
Motion control: Suggest motion by blurring moving objects, or “freeze” motion to capture moving objects clearly. Freeze motion z Blur motion Freeze motion Blur motion Brightness control: Make pictures brighter or darker. Brighter D Live Image Control Darker Brighter Darker Continuous shooting is not available (0 87) and the built-in flash can not be used when live image control is in effect. Pressing the movierecord button cancels live image control.
Choosing a Creative Mode Choose creative mode to match settings to the subject or situation, take photos using special effects, or control shutter speed and aperture. 1 Select w mode. Press the G button to display the menus. Select Shooting mode, then highlight w (creative mode) and press J (0 27). z 2 Choose a scene. Press 1 (&) and highlight a scene using the multi selector (0 50). Press J to select the highlighted scene. Your selection is indicated by an icon in the display.
Choosing a Mode That Matches the Subject or Situation Choose a creative mode according to the subject or situation: Option z 50 Description The camera sets shutter speed and aperture for optimal exposure (0 52). Recommended for snapshots Programmed auto (P) and in other situations in which there is little time to adjust camera settings. You choose the shutter speed; the camera selects an Shutter-priority auto aperture for best results (0 53). Use to freeze or blur (S) motion.
Option Description Capture background lighting in portraits taken at night or under low light. Each time the shutterrelease button is fully pressed, the camera takes a series of shots, some with the flash and some without, and combines them; during processing, a message is displayed and no pictures can be taken. Raise Night portrait (o) the built-in flash before shooting; no photograph will be taken if the flash is not raised.
Taking Photos in P, S, A, and M Modes P, S, A, and M modes offer varying degrees of control over shutter speed and aperture. Choose a mode and adjust settings according to your creative intent. z ❚❚ P Programmed Auto In this mode, the camera automatically adjusts shutter speed and aperture for optimal exposure in most situations. This mode is recommended for snapshots and other situations in which you want to leave the camera in charge of shutter speed and aperture.
❚❚ S Shutter-Priority Auto In shutter-priority auto, you choose the shutter speed while the camera automatically selects the aperture that will produce the optimal exposure. Use slow shutter speeds to suggest motion by blurring moving subjects, fast shutter speeds to “freeze” motion. Fast shutter speed (1/1600 s) z Slow shutter speed (1 s) Choosing a Shutter Speed Use the X and W buttons to choose from W button shutter speeds between 30 s and 1/16,000 s.
z ❚❚ A Aperture-Priority Auto In aperture-priority auto, you choose the aperture while the camera automatically selects the shutter speed that will produce the optimal exposure. Large apertures (low f-numbers) reduce depth of field, blurring objects behind and in front of the main subject. Small apertures (high f-numbers) increase depth of field, bringing out details in the background and foreground.
❚❚ M Manual In manual mode, you control both shutter speed and aperture. Choosing Shutter Speed and Aperture Adjust shutter speed and aperture with reference to the exposure indicator (see below). Press 2 to highlight shutter speed or aperture and use the X and W W button buttons to choose a value, then repeat for the remaining item. Press X for faster shutter speeds or smaller apertures (higher f-numbers), W for slower shutter speeds and larger apertures (lower fnumbers).
A The Exposure Indicator When shutter speeds other than “Bulb” are selected, the exposure indicator shows whether the photograph would be underor over-exposed at current settings.
Backlighting The method used to capture details in shaded areas of back-lit subjects depends on the option selected for HDR in the shooting menu (0 99). Details in highlights and shadows are preserved using HDR (high dynamic range); Z appears in the display. Each time the shutterrelease button is fully pressed, the camera takes two shots in quick succession and combines them to preserve details in highlights and shadows in high-contrast scenes; the built-in flash does not fire.
Easy Panorama Follow the steps below to shoot panoramas. During shooting, the camera focuses using auto-area AF; face detection is not available. Exposure compensation can be used, but the built-in flash will not fire. z 1 Set focus and exposure. Frame the start of the panorama and press the shutter-release button halfway. Guides will appear in the display. 2 Start shooting. Press the shutter-release button the rest of the way down and then lift your finger from the button.
An example of how to pan the camera is shown below. Without changing your position, pan the camera in a steady curve either horizontally or vertically. Time the pan according to the option selected for Image size in the shooting menu: about 15 seconds are needed to complete the pan when A Normal panorama is selected, about 30 seconds when B Wide panorama is selected. z A Panoramas High-distortion wide-angle lenses may fail to produce the desired results.
z ❚❚ Viewing Panoramas Panoramas can be viewed by pressing J when a panorama is displayed full frame (0 44). The start of the panorama will be displayed with the smallest dimension filling the display and the camera will then scroll through the picture in the original pan direction. Navigation Guide window The following operations can be performed: To Use Pause Play Advance/ rewind Return to full-frame playback 60 Description Pause playback.
PUnderwater Photography With a special-purpose waterproof lens attached, the camera can be used at depths of up to 15 m (49 ft) for as long as 60 minutes at a time. Before using the camera under water, be sure that you have read and understood the instructions in this section and have removed straps intended exclusively for use on land (hand straps, available separately from third-party suppliers, are recommended to prevent loss during underwater use).
P • Do not expose the camera to water colder than 0 °C (32 °F) or warmer than 40 °C (104 °F). Do not take into hot springs or baths. • Do not dive into the water with the camera, drop it, place it under heavy objects, or otherwise subject it to violent shocks or excessive physical pressure or force. The camera may deform and become vulnerable to leaks under excessive external pressure.
Have you inserted the battery and memory card (0 32)? P To prevent water entry and other damage, remove any sand, dust, hair, and foreign objects from under the connector and battery-chamber/ memory card slot covers, and use a blower or cotton swab to remove foreign objects from inside the camera (when using a cotton swab, be sure not to leave any threads behind). If the watertight channel is cracked, deformed, or damaged, consult a Nikon-authorized service representative.
The Final Check P After going through the pre-shooting checklist on page 62 and confirming that the special-purpose waterproof lens is attached and the connector and batterychamber/memory card slot covers are closed and secure, immerse the camera in fresh water, turn it on, and test the zoom ring and camera controls to ensure that they operate normally and that the camera does not leak.
Taking Pictures Underwater Follow steps below to take pictures in “Underwater” mode. 1 Turn the camera on. Press the power switch to turn the camera on. P 2 Select w mode. Press the G button to display the menus, then select Shooting mode, highlight w (creative mode), and press J (0 27). 3 Select Underwater. Press 1 (&) to display the creative menu. Highlight Underwater and press J to display underwater processing options.
4 Choose an option. P Highlight one of the following options and press J to select the highlighted option and return to the shooting display. • 4 Standard: Standard processing for balanced results when shooting along the shore or in shallow water. • 5 Scuba: Vivid colors for deeper waters. • 6 Close up: Enhanced contrast for underwater close-ups. 5 Take pictures. To take photographs, press the shut- Shutter-release button ter-release button halfway to focus and the rest of the way down to shoot.
Tips and Tricks for Underwater Photography The following features may come in handy when you are taking pictures underwater. Auto Distortion Control To control distortion when shooting underwater, select On (underwater) for Auto distortion control in the shooting menu (0 99). This option is only available when a special-purpose underwater lens is attached. P The Built-in Flash To raise the flash for use underwater, press the flash pop-up button (0 91).
The Depth Gauge Using the depth gauge, you can view your depth during shooting or include the depth in the photo info recorded when a picture is taken. Set the gauge to zero before entering the water (0 70). P ❚❚ Viewing Depth 1 Select Record location data. In the setup menu, select Location data, then highlight Record location data and press 2. 2 Select Yes. Highlight Yes and press J. 3 Select Altimeter/depth gauge.
4 Select Depth gauge. Highlight Depth gauge and press J. 5 Exit the menus. Press the shutter-release button halfway to exit the menus. P 6 Display the depth gauge. Press the $ button to display the depth gauge (0 25). A The Depth Gauge The camera depth gauge is not intended as a replacement for specialized diving gauges; the depths shown are approximations only. The display will not show depths over 20 m (65.6 ft); depths over 15 m (49 ft) are shown in red.
❚❚ Setting the Depth Gauge to Zero Follow the steps below to set the depth gauge to zero. 1 Select Alt./depth correction. In the setup menu, select Altitude/ depth options, then highlight Alt./ depth correction and press 2. P 2 Select Correct manually. Highlight Correct manually and press 2. 3 Set the depth gauge to zero. Press 4 or 2 to highlight digits and press 1 or 3 to change. Press J when changes are complete. A See Also For information on altitude and depth options, see page 101.
After Using the Camera Underwater The camera and lens should be cleaned within 60 minutes of underwater use. Leaving the lens attached, immerse the camera in fresh water to remove salt and other foreign matter. Failure to observe this precaution could result in damage, discoloration, corrosion, offensive odors, or vulnerability to leaks.
3 Clean the zoom ring and camera controls. P Being careful not to touch the lens release button or the latches or security locks on the connector and batterychamber/memory card slot covers, press the flash pop-up button to raise the built-in flash and gently move the camera side to side, then operate the lens zoom ring and each of the remaining camera controls a few times to remove salt and other foreign objects. 4 Wipe dry. Dry the camera and lens barrel with a soft, dry cloth.
To prevent water falling into the camera when the covers are opened, hold the camera so that the covers open downwards. 7 Remove the lens. After confirming that the lens and camera are dry, detach the lens and gently wipe the lens O-ring seal with a soft, dry cloth to remove any foreign objects. Note that there may still be water between the camera and the lens; to prevent water falling onto the dust shield or lens when the lens is detached, keep the camera flat and remove the lens slowly.
2 Wash the O-ring. Wash the O-ring thoroughly in fresh water and dry thoroughly. Do not use benzene, thinner, alcohol, soap, neutral detergents, or other cleaning products, as these could damage or weaken the O-ring. 3 Inspect the O-ring. P Remove any foreign matter with a soft, dry cloth, taking care not to leave tissue or threads on the O-ring. Gently bend the O-ring to check for cracking or other damage. 4 Inspect the O-ring guide.
6 Re-insert the O-ring. After making sure that O-ring and guide are free of foreign objects, place the O-ring so that it runs evenly at the same level all the way round the Oring guide, without undue stretching and without protruding from the guide. P D O-Rings The O-ring requires periodic replacement. Replace the O-ring immediately if it is damaged, cracked, warped, or has lost its elasticity.
D Maintenance P Observe the following precautions when cleaning the camera and lens after underwater use. • Never remove the lens or open the connector or battery-chamber/ memory card slot cover under water.
yRecording and Viewing Movies The camera can record high-definition (HD) movies with an aspect ratio of 16 : 9 and slow-motion movies with an aspect ratio of 8 : 3. Movie recording is available in the shooting modes listed below (movie recording is not available in best moment capture and Motion Snapshot modes).
Recording HD Movies Record movies with sound at an aspect ratio of 16 : 9. 1 Turn the camera on. Press the power switch to turn the camera on. y 2 Frame the opening shot. Frame the opening shot with your subject in the center of the display. A The 0 Icon A 0 icon indicates that movies can not be recorded.
3 Start recording. Press the movie-record button to begin recording. A recording indicator, the time elapsed, and the time available are displayed while recording is in progress. A Audio Recording Movie-record button Be careful not to cover the microphone and note that the built-in microphone Recording indicator/ may record sounds made by the camera Time elapsed or lens; these noises may sound louder under water. By default, the camera focuses continuously.
Taking Photographs During HD Movie Recording Press the shutter-release button all the way down to take a photograph without interrupting HD movie recording. Photographs taken during movie recording have an aspect ratio of 3 : 2. y A Taking Photographs During Movie Recording Up to 20 photographs can be taken with each movie shot. Please note that photographs can not be taken with slow-motion movies.
Viewing Movies Movies are indicated by a 1 icon in full-frame playback (0 44). Press J to start playback. Movie playback indicator/ Current position/total length 1 icon/Length y Guide Volume The following operations can be performed: To Use Description Pause Play Pause playback. Resume playback when the movie is paused or during rewind/advance. Press 4 to rewind, 2 to advance. Speed increases with each press, from 2× to 4× to 8× to 16×.
Deleting Movies To delete the current movie, press O. A confirmation dialog will be displayed; press O again to delete the movie and return to playback, or press K to exit without deleting the movie. Note that once deleted, movies can not be recovered. O button y A See Also The Edit movie option in the playback menu can be used to trim unwanted footage from existing movies (0 98). Use the Movie settings option in the movie menu to choose the frame size and rate for HD movies (0 100).
Recording Slow-Motion Movies Silent slow-motion movies with an aspect ratio of 8 : 3 can be recorded by pressing 1 (&) in advanced movie mode and selecting y Slow motion. Slow-motion movies are recorded at 400 fps and play back at about 30 fps. 1 Select v mode. Press the G button to display the menus, then select Shooting mode, highlight v (Advanced movie), and press J (0 27). y 2 Select Slow motion. Press 1 (&), then highlight Slow motion and press J. 3 Frame the opening shot.
4 Focus. Focus area y 5 Start recording. Press the movie-record button to begin recording. A recording indicator, the time elapsed, and the time available are displayed while recording is in progress. The camera focuses on the subject at the center of the display; face detection (0 46) is not Movie-record button available and focus and exposure can Recording indicator/ not be adjusted.
6 End recording. Press the movie-record button again to end recording. Recording will end automatically when the maximum length is reached, the memory card is full, the lens is removed, or the camera becomes hot (0 18). Movie-record button A Maximum Length Up to 3 seconds of footage can be recorded; note that depending on memory card write speed, shooting may end before this length is reached (0 113).
D Recording Movies y Flicker, banding, or distortion may be visible in the display and in the final movie under fluorescent, mercury vapor, or sodium lamps or if the camera is panned horizontally or an object moves at high speed through frame (flicker and banding can be reduced in HD movies by choosing a Flicker reduction option that matches the frequency of the local AC power supply as described on page 101, but note that the slowest shutter speed available is 1/100 s at 50 Hz, 1/60 s at 60 Hz; flicker r
tMore on Photography This section describes other features you can use when taking pictures. Continuous Mode In continuous (burst) mode, the camera takes pictures while the shutter-release button is pressed all the way down. 1 Display release mode options. Press 4 (C) to display release mode options. t 2 Select a frame rate. Highlight the desired frame rate and press J.
D Continuous Mode The maximum number of shots that can be taken in a single burst varies with the release mode. At frame rates of 30 and 60 fps, the maximum number of shots that can be taken in a single burst is 20. The built-in flash can be used when 5 fps is selected, but only one picture will be taken each time the shutter-release button is pressed; at settings of 15, 30, and 60 fps, the built-in flash will not fire.
Self-Timer Modes The self-timer is used to delay shutter release until 10, 5, or 2 seconds after the shutter-release button is pressed all the way down. 1 Display release mode options. Press 4 (C) to display release mode options. 2 Select the desired self-timer option. Use the multi selector to highlight E 10 s, E 5 s, or E 2 s and press J. t 3 Mount the camera on a tripod. Mount the camera on a tripod or place the camera on a stable, level surface. 4 Frame the photograph and shoot.
Note that the timer may not start or a photograph may not be taken if the camera is unable to focus or in other situations in which the shutter can not be released. Turning the camera off cancels the self-timer. A Movie Mode In self-timer mode, start and stop the timer by pressing the movierecord button instead of the shutter-release button. A Raising the Flash If additional lighting is required, press the flash pop-up button to raise the flash before shooting.
The Built-in Flash Use the built-in flash for additional lighting when the subject is poorly lit or to “fill-in” (illuminate) back-lit subjects. 1 Raise the flash. Press the flash pop-up button to raise the flash. Flash pop-up button 2 Choose a flash mode (0 92). t Press 3 (N) on the multi selector to display a list of flash modes, then use the multi selector to highlight the desired mode and press J to select. 3 Take pictures.
t ❚❚ Flash Modes The options available vary with the shooting mode. • N (fill flash): The flash fires with every shot. • NY (red-eye reduction): Use for portraits. The flash fires with every shot, but before it fires, the red-eye reduction lamp lights to help reduce “red-eye.” Not available in 4 (underwater; 5, 6) mode. • NYp (red-eye reduction + slow sync): As for “red-eye reduction”, above, except that shutter speed slows automatically to capture background lighting at night or under low light.
D Raising the Flash When using the flash, be sure it is fully raised as shown at right. Do not touch the flash during shooting. A Lowering the Built-in Flash To save power when the flash is not in use, press it gently downward until the latch clicks into place. Do not use force. Failure to observe this precaution could result in product malfunction. t A Preventing the Built-in Flash from Firing Lowering the flash prevents it firing.
A Using the Built-in Flash The built-in flash can not be used with live image control (0 47) and will not fire during continuous shooting at frame advance rates faster than 5 fps (0 87) or when On is selected for HDR in the shooting menu (0 57). If the flash is fired multiple times in quick succession, the flash and shutter may be temporarily disabled to protect the flash. Shooting can be resumed after a brief pause.
The C (Action) Button Some operations can be performed by keeping the C button pressed and tilting the camera left or right. Shooting: Choosing a Shooting Mode While the view through the lens is displayed, you can choose the shooting mode by pressing the C button, tilting the camera left or right to highlight the desired mode, and releasing the button to select the highlighted option.
Playback: Scrolling Through Pictures During playback, you can choose the picture displayed by pressing the C button, tilting the camera left or right, and releasing the button to display the selected picture full frame (in thumbnail playback, the camera will display and scroll through pictures full frame while the C button is pressed, and then when the button is released return to thumbnail playback with the selected picture highlighted).
Menus: Outdoor Display When menus are displayed, you can toggle the outdoor display on or off by pressing the C button, tilting the camera left or right, and releasing the button to select the current mode. Enabling the outdoor display makes the display easier to read outdoors or wherever ambient lighting is bright by setting the Display brightness and High contrast display options in the Display menu to Hi and On, respectively (0 100), but also increases the drain on the battery.
MMenu Options To display the playback, shooting, movie, image processing, and setup menus, press the G button. Following menu options are available: G button ❚❚ Playback Menu Options Option Delete Slide show M Image review Rotate tall DPOF print order Protect Rating D-Lighting Resize Crop Face-priority zoom Edit movie Change theme 98 Description Delete multiple images. View movies and photos in a slide show. Choose whether pictures are displayed after shooting.
❚❚ Shooting Menu Options Option Reset shooting options Description Reset shooting options to default values. Choose how the camera sets shutter speed and aperture in Motion Snapshot mode. Image quality Choose a file format and compression ratio. Image size Choose a size for new photos. Number of shots Choose the number of shots selected by the Smart saved Photo Selector. Choose when the movie portion of Motion Movie before/after Snapshots is recorded.
❚❚ Movie Menu Options Option Reset movie options Frame rate Movie settings Metering Movie sound options Optical VR Focus mode AF-area mode Face-priority Description Reset movie menu options to their default values. Choose a frame rate for slow-motion movies (0 83). Choose HD movie frame size and frame rate (0 78). Choose how the camera meters exposure. Choose sound recording options. Adjust settings for 1 NIKKOR lenses with vibration reduction. Choose how the camera focuses.
Option Sound settings Auto power off Shutter button AE lock Control lock Description Choose the sounds made during shooting. Choose the auto power off delay. Choose whether exposure locks when the shutterrelease button is pressed halfway. Disable selected controls. Record or view location data or use location data to set the clock, update assisted GPS files, and choose Location data auto power off options for when the location data function is active.
QConnecting to a Computer Installing the Supplied Software Install the supplied software to copy pictures to your computer for viewing and editing pictures and creating short movies. Before installing the software, confirm that your system meets the requirements on page 103. 1 Launch the installer. Start the computer, insert the ViewNX 2/Short Movie Creator installer CD, and launch the installer.
System Requirements The system requirements for ViewNX 2 are: Windows • Photos: Intel Celeron, Pentium 4, Core Series; 1.6 GHz or better • Movies (playback): Pentium D 3.
A Motion Snapshots ViewNX 2 is required to view Motion Snapshots saved using the File format > NMS files option in the shooting menu (0 99). A Supported Operating Systems See the websites listed on page 19 for the latest information on supported operating systems.
Viewing and Editing Pictures on a Computer Transferring Pictures 1 Choose how pictures will be copied to the computer. Choose one of the following methods: • Direct USB connection: Turn the camera off and ensure that the memory card is inserted in the camera. Unlock (q), unlatch (w), and open (e) the connector cover and then connect the camera to the computer using the supplied USB cable (do not use force or insert the connectors at an angle) and then turn the camera on.
2 Start the Nikon Transfer 2 component of ViewNX 2. If a message is displayed prompting you to choose a program, select Nikon Transfer 2. A Windows 7 If the following dialog is displayed, select Nikon Transfer 2 as described below. 1 Under Import pictures and videos, click Change program. A program selection dialog will be displayed; select Import File using Nikon Transfer 2 and click OK. 2 Double-click Import file. 3 Click Start Transfer.
Viewing Pictures Pictures are displayed in ViewNX 2 when transfer is complete. A Starting ViewNX 2 Manually • Windows: Double-click the ViewNX 2 shortcut on the desktop. • Mac OS: Click the ViewNX 2 icon in the Dock. ❚❚ Retouching Photographs To crop pictures and perform such tasks as adjusting sharpness and tone levels, click the Edit button in the toolbar. ❚❚ Printing Pictures Click the Print button in the toolbar.
nTechnical Notes Read this chapter for information on compatible accessories, cleaning and storing the camera, and what to do if an error message is displayed or you encounter problems using the camera. Optional Accessories At the time of writing, the following accessories were available for your camera.
Wireless mobile adapters Wireless Mobile Adapter WU-1b: Supports two-way communication between the camera and smart devices running the Wireless Mobile Utility app. Use the Wireless Mobile Utility to take pictures remotely or download existing pictures to the smart device. A Optional Accessories Availability may vary with country or region. See our website or brochures for the latest information.
Non-Waterproof 1 NIKKOR Lenses The supplied O-ring protector must be attached to the camera lens mount before the camera can be used with non-waterproof 1 NIKKOR lenses like the 1 NIKKOR VR 10–30mm f/3.5–5.6 shown in the illustrations below. Use a soft cloth to remove any foreign matter from the inside of the protector before use, and be careful to prevent dust entering the camera or adhering to the Oring protector.
Mounting mark (camera) Keeping the mounting marks aligned, position the lens on the camera Mounting mark (lens) Rotate the lens as shown until it clicks into place. n If the lens supports vibration reduction Zoom ring (VR), vibration reduction can be controlled from the camera (0 99). Note that lenses with retractable lens barrel buttons can not be used when retracted.
A Detaching Non-Waterproof Lenses Before removing or exchanging lenses, turn the camera off. To remove the lens, press and hold the lens release button (q) while turning the lens as shown (w). After removing the O-ring protector from the camera, clean any foreign matter from the O-ring and replace the lens caps and camera body cap, and then clean the O-ring protector with a soft cloth and place the protector on the front of the body cap.
Approved Memory Cards The following cards have been tested and approved for use in the camera. Cards with class 6 or faster write speeds are recommended for movie recording. Recording may end unexpectedly when cards with slower write speeds are used.
Storage and Cleaning Underwater Use For information on cleaning the camera after use under water or on the seashore, see page 71. Storage If the camera will not be used for an extended period, remove the battery and store it in a cool, dry area with the terminal cover in place. To prevent mold or mildew, store the camera in a dry, well-ventilated area.
Caring for the Camera and Battery: Cautions Before using the camera, read the warnings on pages 7–14. Read pages 61–76 before using the camera under water. Do not drop: The product may mal- scratch or otherwise damage the function if subjected to strong shield. shocks or vibration.
Storage: To prevent mold or mildew, store the camera in a cool, dry, well-ventilated area. If you are using an AC adapter, unplug the adapter to prevent fire. If the product will not be used for an extended period, remove the battery to prevent leakage and store the camera in a plastic bag containing a desiccant. Do not, however, store the camera case in a plastic bag, as this may cause the material to deteriorate.
Batteries: Batteries may leak or explode if improperly handled. Observe the following precautions when handling batteries: • Use only batteries approved for use in this equipment. • Do not expose the battery to flame or excessive heat. • Keep the battery terminals clean. • Turn the product off before replacing the battery. • Remove the battery from the camera or charger when not in use and replace the terminal cover.
• Do not use the battery at ambient temperatures below 0°C (32°F) or above 40 °C (104 °F); failure to observe this precaution could damage the battery or impair its performance. Capacity may be reduced and charging times may increase at battery temperatures from 0 °C (32 °F) to 10 °C (50 °F) and from 45 °C (113 °F) to 60 °C (140 °F); the batter y will not charge if its temperature is below 0°C (32°F) or above 60°C (140°F).
Troubleshooting If the camera fails to function as expected, check this list of common problems before consulting your retailer or Nikon representative. Battery/Display The camera is on but does not respond: • Controls are locked (0 101). • The camera is busy. Wait for recording or any other processing to end. If the problem persists, turn the camera off.
Flicker or banding appears in movies or in the display: Choose a Flicker reduction setting that matches the local AC power supply (0 101). No flash: See page 94. The flash will not fire when off (0 92) or when lowered. Menu items are unavailable: Some options are only available in particular shooting or exposure modes or when wireless mobile adapter is attached. Movies Cannot record movies: The movie-record button can not be used to record movies in best moment capture or Motion Snapshot mode.
Error Messages This section lists the error messages that appear in the display. Message Solution If the subject is too bright, lower ISO sensitivity or choose a faster shutter speed or smaller aper(Shutter-speed or ture (higher f-number). aperture display If the subject is too dark, raise ISO sensitivity, use flashes) the flash, or choose a slower shutter speed or larger aperture (lower f-number).
n 122 Message Solution • Use an approved card. This memory card • Format the card. If the problem persists, the cannot be used. Card card may be damaged. Contact a Nikon-authomay be damaged; rized service representative. insert a different card. • Insert a new memory card. If the current folder is numbered 999 and contains either 999 photographs or a photograph numbered 9999, the shutter-release button will be disCannot create additional folders on abled and no further photographs can be taken.
Specifications Nikon 1 AW1 Digital Camera Type Type Lens mount Effective angle of view Effective pixels Image sensor Image sensor Storage Image size (pixels) Digital camera with support for interchangeable lenses Nikon waterproof 1 mount Approx. 2.7× lens focal length (35 mm format equivalent) 14.2 million 13.2 mm × 8.
File format Picture Control system Media File system Shooting modes n Shutter Type Speed Flash sync speed Release Mode Frame advance rate Self-timer 124 • NEF (RAW): 12-bit, compressed • JPEG: JPEG-Baseline compliant with fine (approx. 1 : 4), normal (approx. 1 : 8), or basic (approx.
Exposure Metering Metering method TTL metering using image sensor • Matrix • Center-weighted: Meters 4.
Flash Built-in flash Guide Number (GN) Control Mode Flash compensation Flash-ready indicator White balance Manual pop-up Approx. 5/16 (m/ft, ISO 100, 20 °C/68 °F; at ISO 160, Guide Number is approx. 6.3/20.
Monitor 7.5 cm (3-in.), approx.
Operating environment Temperature –10 °C–+40 °C (+14 °F–104 °F) on land, 0 °C– +40 °C (+32 °F–104 °F) in water Humidity 85% or less (no condensation) Shock-, water-, and dust-proofing Shockproof Has passed in-house tests 3 to MIL-STD-810F performance 1, 2 Method 516.
EN-EL20 rechargeable Li-ion battery Type Rechargeable lithium-ion battery Rated capacity 7.2 V, 1020 mAh Operating temperature 0 °C–40 °C (+32 °F–104 °F) Dimensions (W × H × D) Approx. 30.7 × 50.0 × 14.0 mm (1.2 × 2.0 × 0.6 in.) Weight Approx. 41 g (1.4 oz), excluding terminal cover 1 NIKKOR AW 11–27.5mm f/3.5–5.6 Lens Type Waterproof 1 mount lens Focal length 11–27.5 mm Maximum aperture f/3.5–5.
n 1 NIKKOR AW 10mm f/2.8 Lens Type Waterproof 1 mount lens Focal length 10 mm Maximum aperture f/2.8 Construction 6 elements in 5 groups (including 2 aspherical lens elements), 1 protective glass element Angle of view 77° Minimum focus distance 0.2 m (0.7 ft) from focal plane Diaphragm blades 7 (rounded diaphragm opening) Diaphragm Fully automatic Aperture range f/2.8–11 Electronic compass Electronic compass can be used when lens is attached to camera Filter-attachment size 40.5 mm (P=0.
❚❚ Waterproof 1 NIKKOR Lenses 1 NIKKOR AW 11–27.5mm f/3.5–5.6 Lens cap Zoom ring Lens mounting mark O-ring seal CPU contacts Focal length mark Focal length scale 1 NIKKOR AW 10mm f/2.
Waterproof 1 NIKKOR lenses are exclusively for Nikon 1 AW1 interchangeable lens format digital cameras. The angle of view is equivalent to a 35 mm format lens with a focal length about 2.7× longer. When attached to a waterproof camera, the water-, dust-, and shock-proof 1 NIKKOR AW 11–27.5mm f/3.5–5.6 and 1 NIKKOR AW 10mm f/2.8 lenses are compliant with the JIS/IEC Class 8 (IPX8) waterproofing standard, allowing the camera to be used at depths of up to 15 m (49 ft) for as long as 60 minutes at a time.
D Using the Lens Under or Next to Water • Never remove the lens under water. • When attaching and removing the lens, carefully inspect the camera O-ring and the lens O-ring seal to be sure that they are free of threads, lint, hair, dust, sand, liquids, and other foreign matter. Be sure that the camera O-ring is not protruding, twisted, or out of position. • Do not attach or remove the lens with wet or salt-covered hands or in areas exposed to spray, wind, sand, or dust.
A Trademark Information Mac OS and OS X are registered trademarks of Apple Inc. in the United States and/or other countries. Microsoft, Windows, and Windows Vista are either registered trademarks, or trademarks of Microsoft Corporation in the United States and/or other countries. The PictBridge logo is a trademark. The SD, SDHC, and SDXC logos are trademarks of SD-3C, LLC. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
Battery Life The number of shots or movie footage that can be recorded with fully-charged batteries varies with the condition of the battery, temperature, the interval between shots, and the length of time menus are displayed. Sample figures for EN-EL20 (1020 mAh) batteries are given below. • Still images: Approximately 250 shots • Movies: Approximately 55 minutes of HD footage at 1080/60i Measured according to CIPA standards at 23 ±3 °C (73.4 ±5.
Index n 136 Symbols A C (Auto mode) ........................... 28, 40 w (Creative mode) .................. 28, 49 u (Best moment capture mode) 28 v (Advanced movie mode) .. 29, 77 z (Motion Snapshot mode) .......... 27 P (Programmed auto) ......... 50, 52, 77 S (Shutter-priority auto) .... 50, 53, 77 A (Aperture-priority auto) . 50, 54, 77 M (Manual) ............................. 50, 55, 77 j (Night landscape) ......................... 50 o (Night portrait) ..............................
F Movies ................................................... 77 Face priority .........................................46 Fill flash .................................................92 Flash .......................................................91 Flash mode ..........................................92 Flash range ..........................................94 Flash-ready indicator .......................91 Flexible program ...............................52 Focal length ....................................
Shutter-release button .................... 42 Silicon grease ......................35, 75, 108 Size ............................................. 123, 126 Slow motion ........................................ 83 Slow view ............................................. 28 Smart Photo Selector ....................... 28 Soft ......................................................... 51 Speaker ................................................. 22 Standard (Underwater mode) ......
n 139
n 140
No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION.