Instruction Manual

31
30
EnEn
B
B
E
F
C
D G
A
Model BLACK X1000 4-16×50SF X-MOA BLACK X1000 4-16×50SF IL X-MOA BLACK X1000 6-24×50SF IL X-MOA
Reticle X-MOA X-MOA X-MOA
Maginification (×) 16 16 18
Reticle subtensions @ 100 yd.
Unit MOA MOA MOA
A 0.15 0.15 0.15
B 2.0 2.0 2.0
C 10.0 10.0 10.0
D 20.0 20.0 20.0
E 1.0 1.0 1.0
F 4.0 4.0 4.0
G 6.0 6.0 6.0
Letters A to G in the diagram above refer to the reticle subtensions of units A to G shown on the table to the right.
Reticle Subtension Chart for X-MOAUsing X-MOA for Moving Target Leads
Moving target leads are very similar to wind holds, although typically much more difficult to master. Instead of “holding into the wind”, you will be “holding in front
of the target” (Fig. 4-13). There are various methods to mathematically calculate the target lead (such as multiplying the bullet flight time to your target distance
by the speed the target) to determine the lead as it applies to the various reticle subtend points and then choosing the correct hold point.
TARGET
MOVING
Fig. 4-13
16× @ 100 yd.