Mode d'emploi

Keeping the reticle’s various reference points in mind, split-second range estimates can be made easily for shooting both up-close

at 1× or at longer ranges using the full 4× magnification*. By knowing your target’s size you can use the SPEEDFORCE to estimate

range, and for other applications such as holdovers, windage hold-offs and moving target leads.

The SPEEDFORCE reticle was designed around the velocity and bullet drops of the factory .223 Rem. with 55 gr. bullet (BC 0.240)

and a muzzle velocity of approx 3240 fps (feet per second). The two “ballistic circles” beneath the center dot offer see through aiming

points at ranges of approximately 300 yards (274.3 meters) and 400 yards (365.8 meters) when zeroed at 100 yards (91.4 meters)

(Fig. 4-5).

* The BLACK FORCE1000 Riflescope has the SPEEDFORCE reticle placed in the riflescope’s second focal plane, so when shooting at ex-

tended distances utilizing holdover, all corrections, ranging and other measurements using the indicated reticle subtensions should be

done at 4×.

Fig. 4-5

100 yd. (91.4 m) - Center

200 yd. (182.9 m) - Bottom of Circle

300 yd. (274.3 m)

400 yd. (365.8 m)