Instruction Manual

ManualsBrandsNikon ManualsRiflescopesBLACK FX1000

Using FX-MRAD for moving target leads

Moving target leads are very similar to wind holds, although typically much more difficult to master. Instead of “holding into the wind,” you will be “holding in front of the target”

(Fig. 4-10). There are various methods to mathematically calculate the target lead (such as multiplying the bullet flight time to your target distance by the speed the target) to

determine the lead as it applies to the various reticle subtend points and then choosing the correct hold point.

TARGET

MOVING

Fig. 4-10