User's Manual
123
Technical Notes—Troubleshootng
Camera Error Messages and Displays
This section lists the indicators and error messages that appear in the
viewfi nder, control panel, and monitor when there is a problem with the
camera.
Indicator
Problem Solution
Control
panel
View-
fi nder
Low battery.
Ready a fully-charged spare
bat tery.
8
14
(blinks) (blinks)
Battery exhausted. Replace battery.
8
14
(blinks)
Camera can not detect bat-
tery.
Insert battery. 8
(blinks)
Camera clock is not set. Set camera clock.
10
68
(blinks)
No memory card. Insert memory card. 11
(blinks) (blinks)
Memory insuffi cient to record
further photos at current set-
tings, or cam era has run out of
fi le or folder numbers.
• Reduce quality or size.
• Delete photographs.
• Insert new memory card.
30
84
11
(blinks)
Lens aperture ring is not locked
at minimum aperture.
Lock ring at minimum aperture
(largest f/-number).
7
(blinks)
No lens attached, or non-CPU
lens attached.
Attach CPU lens (IX Nikkor ex-
cluded), or rotate mode dial to
M and use lens aperture ring to
set aperture.
7
45
105
●
(blinks)
Camera unable to focus using
autofocus.
Focus manually. 35
Subject too bright; photo will
be overexposed.
• Choose lower sensitivity.
• Use optional Neutral Density
(ND) fi lter
• In mode:
S Increase shutter speed
A Choose smaller ap er ture
(larg er f/-number)
39
114
43
44