Operation Manual

Overview Appendices

Return to ﬁ rst page

Using Camera Control Pro

Camera Control Pro 2

Camera Controls 9/20

The Mechanical Tab

The fol low ing settings can be ad just ed from the Me chan i cal tab:

Release Mode

Shoot ing Mode

The shooting mode for D80, D70-series, D60, D50, D40-series, or D5000 cameras

can be selected from Single and Continuous. Unless

Enable Controls on Cam-

era Body

era Body is checked in the connection status area, the shooting mode for D3-se-

ries, D2-series, D700, D300-series, D200, D90, and D7000 cameras can be selected

from Quiet (D3S, D300S, and D7000 only), Single, Continuous low speed, and

Continuous high speed (note that Single will be selected if a self-timer or re-

mote control mode is selected with the D90). If Continuous is selected for D80,

D70-series, D60, D50, D40-series, or D5000 cameras or if Continuous low speed

or Continuous high speed is selected for D3-series, D2-series, D700, D300-series,

D200, D90, and D7000 cameras, the AF and Shoot and Shoot buttons will instead

be labeled AF and Start and Start and the maximum number of shots that can

be taken in a single burst can be entered in the Shots text box (see below). If

Enable Controls on Camera Body

Enable Controls on Camera Body is checked or a D100 camera is connected,

the current shooting mode will be shown, but changes can only be made using

camera controls. See the camera manual for details.