Operation Manual

Overview Appendices
Return to fi rst page
68
Using Camera Control Pro
Camera Control Pro 2
Camera Controls 12/20
Continuous Mode (All Models Except
D100
)
The amount of memory remaining in the camera memory buff er is displayed at the right edge of
the simulated LCD panel. This information is updated at regular intervals, but temporary discrepan-
cies may exist between the display and the actual amount of memory remaining in the buff er.
Non-CPU Lenses
The following restrictions apply to Camera Control Pro when a non-CPU lens is mounted on the
camera (the operations listed can still be performed using the controls on the camera body; see the
camera manual for details):
D200
D3 series D2 series
D300 series D700
D7000
D5000
D50 D40 series
D90 D80
D60 D70 series
D100
With
lens
data
No data
With
lens
data
No data
Exposure
Mode
Can be selected
from Aperture Pri-
ority and Manual.
Can only be adjusted if
Enable Controls
Enable Controls
on Camera Body
on Camera Body is not checked. Pho-
tos can be taken in modes A and M only
(D7000) or mode M only (other cameras).
Can not be ad-
justed. Mode se-
lected with cam-
era displayed.
Photos can only
be taken in mode
M.
Shutter Speed Can only be adjusted in manual exposure mode.
Aperture
Shown
with as-
terisk.
Aperture
shown as
“f/--”. Can
not be ad-
justed.
Shown
with as-
terisk.
Aperture shown as “f/--”. Can not be adjusted.
AF and Shoot Can not be used.
Shoot Can be used. Can be used.*
* Warning will be displayed in exposure modes other than M.