Reference Manual (complete instructions)

192
Technical Notes
Error Messages
Refer to the table below if an error message is displayed.
Error Messages
Display Cause/Solution A
Battery temperature
is elevated. The
camera will turn off.
The camera turns off automatically. Wait until the
camera or battery temperature has cooled before
resuming use.
–
The camera will turn
off to prevent
overheating.
Memory card is write
protected.
The write-protect switch is locked. Unlock it. 190
This card cannot be
used.
An error occurred while accessing the memory card.
• Use an approved memory card.
• Check that the terminals are clean.
• Confirm that the memory card is correctly inserted.
16, 216
This card cannot be
read.
Card is not
formatted. Format
card?
The memory card has not been formatted for use in
the camera.
Formatting deletes all data saved on the memory card.
If you need to keep copies of any images, make sure to
select No and save the copies to a computer or other
medium before formatting the memory card. Select
Yes and press the k button to format the memory
card.
16, 190
Out of memory. Delete images or insert a new memory card. 16, 28
Image cannot be
saved.
An error occurred while saving the image.
Insert a new memory card or format the memory card
or internal memory.
16, 173
The camera has run out of file numbers.
Insert a new memory card or format the memory card
or internal memory.
16, 173
There is insufficient space to save the copy.
Delete images from the destination.
28
Image cannot be
modified.
Check that the images can be edited. 88, 201
Cannot record
movie.
A time-out error occurred while saving the movie on
the memory card.
Select a memory card with a faster write speed.
98, 216