Reference Manual (complete instructions)

209
Technical Notes
Accessories
Status Lamp on the Remote Control (for COOLPIX A1000)
4Power button
Press the button to turn on the remote control and
search for a camera that has already been paired.
Press and hold the button (for at least 3 seconds) to
search for a new pairing camera. To turn off the
remote control, press the button again.
5Status lamp
Indicates the remote control status or shooting
session status, based on the color and behavior of
the lamp. See “Status Lamp on the Remote Control
(for COOLPIX A1000)” (A209) for more information.
6 Shutter-release button
Functions similarly to the shutter-release button on
the camera.
• Half-press and press-and-hold operations are not
available.
• When using the self-timer, you can press the
button during the countdown to cancel shooting.
7 k (apply selection) button
Applies the selected item. When adjusting manual
focus, press this button to stop focusing.
8
w1 (Function 1) / w2
(Function 2) buttons
Cannot be used with this camera.
Color Status Description
Green Flashing about every second
Remote control is searching for a camera
that has already been paired.
Green
Flashing quickly (about every
0.5 seconds)
Pairing process is being performed.
Green Flashing about every 3 seconds
Connection is established between
remote control and camera.
Orange Flashes once Still image shooting starts.
Orange Flashes twice
Still image shooting ends (Time-lapse
movie, Multiple exp. Lighten).
Red Flashes once Movie recording starts.
Red Flashes twice Movie recording ends.
Control Function