Reference Manual

154
Using the Menu
The Playback Menu
Slide Show
Play back images one by one in an automated “slide show.” When movie files are
played back in the slide show, only the first frame of each movie is displayed.
1 Use the multi selector HI to select
Start and press the k button.
• The slide show begins.
• To change the interval between images, select
Frame intvl, press the k button, and specify
the desired interval time before selecting Start.
• To repeat the slide show automatically, select
Loop and press the k button before selecting
Start.
• The maximum playback time is up to about 30 minutes even if Loop is enabled.
2 End or restart the slide show.
• The screen shown on the right is displayed
after the slide show ends or is paused. To exit
the show, select G and then press the k
button. To resume the slide show, select F
and then press the k button.
Operations During Playback
• Use the multi selector HIJK or rotate it to display the previous/next image.
Press and hold them down to rewind/fast-forward images quickly.
• Press the k button to pause or end the slide show.
Press the c button (playback mode) M d button M Slide show M k button
Slide show
Start
Frame intvl
Loop
Pause