Reference Manual

193
Technical Notes
Error Messages
Memory contains no
images.
There are no images in the internal memory or on the
memory card.
• Remove the memory card to play back images in
the internal memory.
16
• To copy the images saved in the camera’s internal
memory to the memory card, press the d button
to select Copy in the playback menu.
120
File contains no
image data.
The file was not created or edited with this camera.
The file cannot be viewed on this camera.
View the file using a computer or the device used to
create or edit this file.
–
Cannot select this
image.
RAW images and images captured with other cameras
cannot be marked for upload.
–
All images are
hidden.
There are no images available for a slide show, etc. –
This image cannot be
deleted.
The image is protected.
Disable protection.
155
The flash is lowered.
When the scene mode is Scene auto selector, you
can take a picture even if the flash is lowered but the
flash will not fire.
34
Raise the flash.
When the scene mode is Night portrait or
Backlighting with HDR set to Off, you must raise the
flash to take a picture.
35, 37
No card present.
When shooting in Time-lapse movie or Multiple
exp. Lighten scene mode, or when the shooting
mode is set to short movie show mode, insert a
memory card.
–
Turn the camera off
and then on again.
An error occurred in lens operation.
Do not apply excessive force on the lens.
If you turn the camera off and then on again, lens
operation will return to normal.
If the error persists even after turning the camera off
and then on again, contact your retailer or Nikon-
authorized service representative.
–
Communications
error
An error occurred while communicating with the printer.
Turn the camera off and reconnect the USB cable.
112
System error
An error occurred in the camera’s internal circuitry.
Turn the camera off, remove and reinsert the battery,
and turn the camera on. If the error persists, contact
your retailer or Nikon-authorized service representative.
195
Display Cause/Solution A