Reference Manual

211
Technical Notes
Accessories
6 Press and hold (for at least 3 seconds) the power button on the
remote control.
• Pairing starts for the camera and remote control. During the process, the status
lamp on the remote control flashes about every 0.5 seconds.
• When pairing is complete, a connection is
established between the camera and the
remote control. When you enter shooting
mode, M is displayed on the shooting screen.
• If a pairing failure message is displayed,
perform the procedure again from step 5.
Switching the Connection to a Smart Device
• Switch the connection from Remote control to Smart device in Choose
connection in the camera network menu (A158, 210).
• When the SnapBridge app is launched on your smart device, and a connection is
established between the camera and smart device, L is displayed on the shooting
screen.
• When establishing a wireless connection with a smart device for the first time, see
the included “SnapBridge Connection Guide”.
1 / 25 0
1/250
F 3 .4
F3.4
5 0 0
500
2 5 m 0s
25m 0s
0 . 0
0.0
1 0 0
100