User manual

197
Technical Notes
Troubleshooting
No information
displayed on the
screen.
Hide info is selected for Photo info in Monitor settings
in the setup menu.
163
Date stamp not
available.
Time zone and date has not been set in the setup menu. 161
Date not stamped
on images even
when
Date stamp
is enabled.
• The date cannot be stamped with certain shooting
modes or when using certain settings in other functions.
• The date cannot be stamped on movies.
80, 166
Screen for setting
time zone and
date is displayed
when the camera
is turned on.
The clock battery is exhausted; all settings were restored to
their default values. Configure the camera settings again.
• The internal clock battery is used to power the camera
clock and to retain certain settings. Charging time of the
clock battery takes about 10 hours when you insert the
battery into the camera or connect the AC adapter
(available separately) to the camera, and the clock battery
operates for several days even after the camera battery is
removed.
–
The camera
settings reset.
The camera
makes sound.
Depending on the Autofocus mode setting or the
shooting mode, the camera may produce an audible
focusing sound.
31,
143,
150
Unable to select a
menu.
• Some functions cannot be used with other menu settings. 80
• Some menus are not available while a wireless
connection is established. Disconnect the wireless
connection.
–
• The network menu cannot be selected when an HDMI
cable is connected.
–
Problem Cause/Solution
A