User manual
Table Of Contents
- Quick Topic Search
- Introduction
- Parts of the Camera
- Getting Started
- Basic Shooting and Playback Operations
- Shooting Features
- Selecting a Shooting Mode
- Auto Mode
- Scene Mode (Shooting Suited to the Shooting Conditions)
- Creative Mode (Applying Effects When Shooting)
- P, S, A, and M Modes (Setting the Exposure for Shooting)
- Setting Shooting Functions with the Multi Selector
- Flash Mode
- Self-timer
- Focus Mode
- Using the Creative Slider
- Exposure Compensation (Adjusting Brightness)
- Using the Fn (Function) Button
- Using the Zoom
- Using Touch Shooting
- Focusing
- Default Settings (Flash Mode, Self-timer, and Focus Mode)
- Functions That Cannot Be Used Simultaneously When Shooting
- Playback Features
- Movies
- Connecting the Camera to a TV, Printer, or Computer
- Using the Menu
- Menu Operations
- Menu Lists
- The Shooting Menu (Common Across Shooting Modes)
- The Shooting Menu (P, S, A, or M Mode)
- The Movie Menu
- The Playback Menu
- The Network Menu
- The Setup Menu
- Time Zone and Date
- Monitor Settings
- EVF Auto Toggle (Automatically Switching the Display to the Viewfinder)
- Date Stamp
- Self-timer: After Release
- Photo VR
- AF Assist
- Digital Zoom
- Assign Side Zoom Control
- AE/AF Lock Button
- Sound Settings
- Auto Off
- Format Card/Format Memory
- Language
- HDMI Output
- Charge by Computer
- Image Comment
- Copyright Information
- Location Data
- Toggle Av/Tv Selection
- MF Peaking
- Reset All
- Touch-screen Controls
- Conformity Marking
- Firmware Version
- Technical Notes
204
Technical Notes
Troubleshooting
The camera does
not respond
when operating
the ML-L7
Remote Control.
2
• The camera is not connected to the ML-L7 Remote
Control (available separately). Press the power button on
the remote control to establish the connection. If M is not
displayed on the shooting screen, perform pairing again.
•
The remote control can be used only for shooting operations.
• The w1/w2 buttons on the remote control cannot be
used with this camera.
210
208
208
Cannot be paired
with the ML-L7
Remote Control.
2
Check the Network menu settings in the camera.
• Set Choose connection to Remote control.
• Set Airplane mode to Off.
• Set Bluetooth M Connection to Enable.
158
Images saved in the
camera are not
displayed on a
connected smart
device or computer.
If the number of images saved on a memory card in the
camera exceeds 10,000, images captured thereafter may not
be displayed in a connected device.
• Reduce the number of images saved on the memory
card. Copy the necessary images to a computer, etc.
–
Images are not
displayed on TV.
• A computer or printer is connected to the camera. –
• The memory card contains no images. –
• Remove the memory card to play back images in the
internal memory.
16
Nikon Transfer 2
does not start
when the camera
is connected to a
computer.
• The camera is off. –
• The battery is exhausted. 16, 17,
188
• The USB cable is not correctly connected. 110,
116
• The camera is not recognized by the computer. –
• The computer is not set to start Nikon Transfer 2
automatically. For more information about Nikon Transfer
2, refer to help information contained in ViewNX-i.
–
The PictBridge
screen is not
displayed when
the camera is
connected to a
printer.
With some PictBridge-compatible printers, the PictBridge
startup screen may not be displayed and it may be
impossible to print images when Auto is selected for
Charge by computer in the setup menu. Set Charge by
computer to Off and reconnect the camera to the printer.
175
Images to be
printed are not
displayed.
• The memory card contains no images. –
• Remove the memory card to print images in the internal
memory.
16
Problem Cause/Solution
A