Quick Start Guide

14
Connecting to a Smart Device (SnapBridge)
Connecting to a Smart Device
(SnapBridge)
When you install the SnapBridge app and establish a wireless
connection between a SnapBridge-supported camera and smart
device, you can upload images captured with the camera to the smart
device, or use the smart device to release the camera shutter (A18).
• Procedures are described using the SnapBridge app Version 2.0. Use
the latest version of the SnapBridge app. The operating procedures may vary
depending on the camera’s firmware, version of the SnapBridge app, or OS of the
smart device.
• See the documentation provided with the smart device for information on how to
use it.
1 Install the SnapBridge app on the smart device.
• Download the app on the Apple App Store® for iOS, and on Google Play™ for
Android™. Search for “snapbridge” and then install it.
• Visit the applicable download site for more information about supported OS
versions.
• The “SnapBridge 360/170 app” cannot be used with this camera.
2 Enable Bluetooth and Wi-Fi on the smart device.
• Use the SnapBridge app to connect to the camera. You cannot connect
from the Bluetooth settings screen on the smart device.
C Screens in the SnapBridge App
1 You can view notices from Nikon and the SnapBridge
app Help, as well as configure the app’s settings.
2 Primarily perform connection settings for smart
devices and cameras.
3 You can view, delete, or share images downloaded
from the camera.
Installing the SnapBridge App
132