User manual

225
Using the menu
The network menu
Option Description
Wi-Fi Network
settings
[C
hannel]: Select the channel used for the Wi-Fi
connection. If the communication quality is poor or
the image upload speed is extremely slow when
using a Wi-Fi connection, try changing the channel.
[Subnet mask]: Use the default setting
([255.255.255.0]) under nor
mal conditions.
[DHCP ser
ver IP address]: Use the default setting
([192.168.0.10]) under normal conditions.
Current
settings
Conrm the cur
rent [Network settings] in a list.
Bluetooth Connection Select [Enable] or [D
isable] for Bluetooth
communication.
Paired devices Display smart devices that have been paired.
Y
ou can change the smart device to connect with, or
delete paired smart devices.
•
This camera can be paired with up to ve smart
devices (only one device can be connected at a
time).
Send while o Select [O
n] or [O] to set whether the camera
communicates with the smart device when the
camera is o or in standby mode.
Restore default settings Restore all network menu settings to their default
values
.
Bluetooth communication indicator and Wi-Fi communication indicator
on the shooting screen
•
About the Bluetooth communication indicator
-
When the camera is connected to a smart device via Bluetooth, is displayed.
-
When the camera is waiting f
or the connection to a smart device to be reestablished,
ashes
. It also ashes when Bluetooth communication is disconnected while
uploading images.
•
About the Wi-Fi communication indicator
-
When the camera is preparing to connect to a smart device via Wi-Fi,
ashes.
-
When the camera is connected to a smart device via Wi-Fi, is displayed.