User manual

Table Of Contents
80
Shooting features
Scene mode (shooting suited to the shooting conditions)
2
F
rame a bird in the framing border (1).
A
t the wide-angle zoom position, the framing border is displayed to indicate the
angle of view equivalent to that of a 500 mm lens (in 35mm [135] format) (default
setting).
You can change the angle of view for the framing border by pressing the
button and selecting [F
ocal length selection].
3
P
ress the
button.
T
he camera zooms in so that the area inside the framing border takes up the entire
angle of view (focal length). Use the zoom control or side zoom control to adjust the
angle of view/zoom position according to the shooting conditions.
The camera focuses on the area in the center of the frame. If you press the
button, you can set [AF ar
ea mode] to [Center (spot)] (default setting), [Center
(normal)], or [Center (wide)]. Set according to the size of the subject and the focus
range.
4
Shoot
.
The Bird-watching mode setting
T
he [Focal length selection], [Continuous], and [AF area mode] settings are saved in
the camera’s memory even after the camera is turned o.
Moon
Use this mode to shoot the moon.
Use of a tripod is recommended (
Using a tripod (page 51)). When using a tripod
t
o stabilize the camera during shooting, select the setup menu
[V
ibration
reduction]
[O
].
1
Rotate the mode dial to
.
T
he default setting of the self-timer is [
3s] (3 seconds). T
o change the setting,
press the multi selector
( ).