User manual

87
Shooting features
Scene mode (shooting suited to the shooting conditions)
2
F
rame the subject and take a picture.
•
The focus mode (
Available focus modes (page 107)) setting is changed to
[M
acro close-up] and the camera automatically zooms to the closest position at
which it can focus.
•
You can move the focus area. Press the
button, use the multi selector
or rotate it to move the focus area, and press the button to apply the setting.
•
F
or [Noise reduction burst]:
-
While the
icon on the shooting screen is displayed in green, press the shutter-
r
elease button all the way to capture a series of images which are combined into a
single image and saved.
-
Once the shutter-release button is pressed all the way, hold the camera still until a
still image is displayed. After taking a picture, do not turn the camera o before
the screen switches to the shooting screen.
•
For [Single shot]:
One image is captured when the shutter-release button is pressed all the way.
Notes about [Noise reduction burst]
•
I
f the subject moves or there is a signicant camera shake during continuous shooting,
the image may be distorted, overlapped, or blurred.
•
The angle of view (i.e., the area visible in the frame) seen in the saved image is narrower
than that seen on the shooting screen.
•
Continuous shooting may not be possible in certain shooting conditions.
Food
Use this mode when taking pictures of food. You can also change the hue.
Rotate the mode dial to
button Food button
1
Adjust hue by using the command dial.
•
T
he hue setting is saved in the camera’s memory even after the camera is turned o.