User's Manual

F7
Technical Notes and Index
Troubleshooting
If the camera fails to function as expected, check the list of common problems
below before consulting your retailer or Nikon-authorized service representative.
Display, Settings and Power Supply
Problem Cause/Solution A
Battery inserted into the
camera cannot be charged.
• Confirm all connections.
• Off is selected for Charge by computer in
the setup menu.
• When charging by connecting the camera to
a computer, battery charging stops when
the camera is turned off.
• When charging by connecting the camera to
a computer, battery charging stops when
the computer is suspended (sleeping), and
the camera may turn off.
• Depending upon computer specifications,
settings, and status, it may be impossible to
charge the battery inserted into the camera
via computer connection.
16
84, E62
84, E62
84, E62
–
Camera cannot be turned
on.
• Battery is exhausted.
• When connecting to an electrical outlet
using a Charging AC Adapter, the camera
cannot be turned on.
20
16
Camera turns off without
warning.
• Battery is exhausted.
• Camera has turned off automatically to save
power.
• The camera and battery may not work
properly at low temperatures.
• The camera turns off if the Charging AC
Adapter is connected while the camera is on.
• The USB cable connecting the camera to the
computer or printer has been disconnected.
Reconnect the USB cable.
• The internal temperature of the camera or
the memory card is high. Leave the camera
off until it has cooled and then turn it on
again.
20
21, E59
F4
16
68, E19
E71