Operation Manual
Table Of Contents
- For Your Safety
- Notices
- Introduction
- First Steps
- Basic Photography and Playback: Auto Mode
- More on Shooting
- More on Playback
- Operations in Full-frame Playback Mode
- Viewing Multiple Images: Thumbnail Playback
- Taking a Closer Look: Playback Zoom
- Selecting Playback Mode
- Sorting Favorite Pictures (Favorite Pictures Mode)
- Image Searching in Auto Sort Mode
- Selecting Images Captured on a Specific Day (List by Date Mode)
- Playback Options
- Setting the Image Rating
- Enjoying Slide Show
- Protecting Important Images (Protect)
- Creating a DPOF Print Order
- Rotate Image
- Voice Memo: Recording and Playback
- Editing Images
- Movie Recording and Playback
- Connecting to Televisions, Computers and Printers
- Basic Camera Setup
- Setup Menu
- Welcome Screen
- Time Zone and Date
- Monitor Settings
- Print Date (Imprinting Date and Time)
- Vibration Reduction
- Motion Detection
- AF Assist
- Digital Zoom
- Sound Settings
- Auto Off
- Format Memory/Format Card
- Language
- TV Settings
- Charge by Computer
- Blink Warning
- Reset All
- Copy (Copy Between Internal Memory and Memory Card)
- Firmware Version
- Setup Menu
- Caring for the Camera
- Technical Notes and Index
162
Setup Menu
Basic Camera Setup
k Auto Off
When the camera is on and a period of time passes without any operations having
been performed, the monitor will be turned off and the camera will enter standby
mode (A 21) to save power.
In this option, set the time allowed to elapse before the camera enters standby
mode. 30 s, 1 min (default setting), 5 min, and 30 min can be selected.
Tap the bottom tab (A 150) M Tap z (Setup menu) M k Auto off
C When the Monitor Turns off for the Power Saving Function
• Power-on lamp blinks in standby mode.
• Camera turns off after three minutes passes in standby mode.
• To reactivate the monitor while the power on lamp is blinking, press any of the following buttons:
- The power switch, shutter-release button, A button, c button, or b (e movie-record)
button
C Auto Off Settings
T
he time allowed to elapse before the camera enters standby mode is fixed in the following
situations:
• When a setting screen, mode selection menu, or setup menu is displayed: three minutes
• During slide show playback: up to 30 minutes
• When the AC adapter EH-62F is connected: 30 minutes