Operation Manual

184
Technical Notes and Index
Troubleshooting
If the camera fails to function as expected, check the list of common problems
below before consulting your retailer or Nikon-authorized service representative.
Display, Settings and Power Supply
Problem Cause/Solution A
The battery inserted in the
camera cannot be charged.
• Confirm all connections.
• Off is selected for Charge by computer in
the setup menu.
• When charging by connecting the camera to
a computer, battery charging stops when the
camera is turned off.
• When charging by connecting the camera to
a computer, battery charging stops when the
computer is suspended (sleeping), and the
camera may turn off.
• Depending upon computer specifications,
settings, and status, charging the battery
inserted in the camera may not be possible
via computer connection.
18
165
142
142
–
Camera cannot be turned on.
• Battery is exhausted.
• The camera cannot be turned on while
connected to an electrical outlet via the
Charging AC Adapter.
26
18
Camera turns off without
warning.
• Battery is exhausted.
• Camera has turned off automatically to save
power.
• The camera and battery may not work
properly at low temperatures.
• The camera turns off if the Charging AC
Adapter is connected while the camera is on.
• The camera turns off if the USB cable
connecting it to a computer or printer is
disconnected. Reconnect the USB cable.
• Inside of the camera has become hot. Leave
the camera off until the inside of the camera
has cooled, and then try turning it on again.
26
162
174
18
138,
140,
144
–