Reference Manual

267Technical Notes
1 Assumes a combined aperture of f/5.6 or faster when AF-S teleconverter is attached.
2 Spot metering meters selected focus point (0 100).
3 Exposure indicator disabled.
4 The shift knob for the PC-E NIKKOR 24mm f/3.5D ED may contact the camera body when the
lens is revolved.
5 Shifting and/or tilting the lens interferes with exposure.
6 Cannot be used with shifting or tilting.
7 Optimal exposure will only be achieved if the lens is at maximum aperture and the lens is not
shifted or tilted.
8 When AF 80–200mm f/2.8, AF 35–70mm f/2.8, AF 28–85mm f/3.5–4.5 (New), or
AF 28–85mm f/3.5–4.5 lenses are zoomed all the way in at the minimum focus distance, the
in-focus indicator (I) may be displayed when the image on the matte screen in the viewfinder
is not in focus. Before shooting, confirm that the image in the viewfinder screen is in focus.
9 With maximum aperture of f/5.6 or faster.
• Noise in the form of lines may appear during autofocus when movies
are recorded at high ISO sensitivities. Use manual focus or focus lock.
D IX NIKKOR Lenses
IX NIKKOR lenses cannot be used. Attempting to attach an IX NIKKOR
lens could damage the lens or camera.
A Identifying CPU and Type G, E, and D Lenses
CPU lenses can be identified by the presence of CPU contacts, type G,
E, and D lenses by a letter on the lens barrel. Type G and E lenses are
not equipped with a lens aperture ring.
CPU contacts Aperture ring
CPU lens Type G or E lens Type D lens
A Type D Lenses
Type D lenses may only be used when the camera is in mode M.
Selecting another mode disables the shutter release. Aperture must be
adjusted manually via the lens aperture ring and the camera metering
system and i-TTL flash control cannot be used.