Menu Guide
Table Of Contents
- Table of Contents
- Menu Guide
- Defaults
- The Playback Menu: Managing Images
- The Photo Shooting Menu: Shooting Options
- Photo Shooting Menu Bank
- Extended Photo Menu Banks
- Storage Folder
- File Naming
- Role Played by Card in Slot 2
- Flash Control
- Image Area
- Image Quality
- Image Size
- NEF (RAW) Recording
- ISO Sensitivity Settings
- White Balance
- Set Picture Control
- Manage Picture Control
- Color Space
- Active D-Lighting
- Long Exposure NR (Long Exposure Noise Reduction)
- High ISO NR
- Vignette Control
- Auto Distortion Control
- Auto Bracketing Set
- Multiple Exposure
- HDR (High Dynamic Range)
- Interval Timer Shooting
- Silent Live View Photography
- The Movie Shooting Menu: Movie Shooting Options
- Custom Settings: Fine-Tuning Camera Settings
- Custom Settings Bank
- a: Autofocus
- a1: AF-C Priority Selection
- a2: AF-S Priority Selection
- a3: Focus Tracking with Lock-On
- a4: 3D-Tracking Face-detection
- a5: 3D-Tracking Watch Area
- a6: Number of Focus Points
- a7: Store by Orientation
- a8: AF Activation
- a9: Limit AF-Area Mode Selection
- a10: Autofocus Mode Restrictions
- a11: Focus Point Wrap-Around
- a12: Focus Point Options
- b: Metering/Exposure
- c: Timers/AE Lock
- d: Shooting/Display
- e: Bracketing/Flash
- f: Controls
- g: Movie
- The Setup Menu: Camera Setup
- Format Memory Card
- Language
- Time Zone and Date
- Monitor Brightness
- Monitor Color Balance
- Virtual Horizon
- Information Display
- AF Fine-Tune
- Non-CPU Lens Data
- Clean Image Sensor
- Lock Mirror up for Cleaning
- Image Dust Off Ref Photo
- Image Comment
- Copyright Information
- IPTC
- Voice Memo Options
- Beep
- Touch Controls
- HDMI
- Location Data
- Wireless Remote (WR) Options
- Assign Remote (WR) Fn Button
- Network
- Slot Empty Release Lock
- Battery Info
- Save/Load Settings
- Reset All Settings
- Firmware Version
- The Retouch Menu: Creating Retouched Copies
- My Menu/Recent Settings
123
Adjust settings for optional WR-R10 wireless remote controllers
and for optional radio-controlled flash units that support
Advanced Wireless Lighting.
❚❚ LED Lamp
Enable or disable the status LEDs on a WR-R10 wireless remote
controller mounted on the camera.
For more information, see the
documentation supplied with the wireless remote controller.
❚❚ Link Mode
Choose a link mode for connection to WR-R10 wireless remote
controllers mounted on other cameras or radio-controlled flash
units that support Advanced Wireless lighting.
Be sure that the
same mode is selected for the other devices.
Regardless of the option selected for Link mode, signals from
paired wireless remote controllers will always be received by the
WR-R10.
Users of the WR-1 remote controller will need to select
pairing as the WR-1 link mode.
Wireless Remote (WR) Options
G button ➜ B setup menu
Option Description
Pairing
To pair the camera with other devices, mount the WR-R10 on
the camera and press the pairing button.
PIN
Connect by entering the device PIN
code.
Press 4 or 2 to highlight digits
and press 1 or 3 to change, then press
J to enter and display the selected PIN.
A The WR-R10 Wireless Remote Controller
The WR-R10 connects to the camera using a WR-A10 adapter.
Be sure
the firmware for the WR-R10 has been updated to the latest version.
For
information on firmware updates, see the Nikon website for your area.