Menu Guide

48
Choose the setting or settings bracketed when auto bracketing is
in effect.
Choose AE & flash (j) to perform both exposure and
flash-level bracketing, AE only (k) to bracket only exposure, Flash
only (l) to perform only flash-level bracketing, WB bracketing (m)
to perform white-balance bracketing, or ADL bracketing (y) to
perform bracketing using Active D-Lighting.
Note that white
balance bracketing is not available at image quality settings of NEF
(RAW) or NEF (RAW) + JPEG.
Record two to ten NEF (RAW) exposures as a single photograph.
Auto Bracketing Set
G button ➜ C photo shooting menu
Multiple Exposure
G button ➜ C photo shooting menu
Option Description
Multiple
exposure mode
• 0 On (series): Take a series of multiple exposures.
Select
Off to resume normal shooting.
• On (single photo): Take one multiple exposure.
• Off: Exit without creating additional multiple exposures.
Number of
shots
Choose the number of exposures that will be combined to
form a single photograph.
Overlay mode
• Add: The exposures are overlaid without modification;
gain is not adjusted.
• Average: Before the exposures are overlaid, the gain for
each is divided by the total number of exposures taken
(gain for each exposure is set to
1
/2 for 2 exposures,
1
/3 for
3 exposures, etc).
• Lighten: The camera compares the pixels in each exposure
and uses only the brightest.
• Darken: The camera compares the pixels in each exposure
and uses only the darkest.